Dust Collection System 20HP 3PH 460V

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

W6QM MICC-FT DRUM

Contract Value

Not provided

Codes & Classification
Solicitation Number

W911S225U1788

NAICS

333413 - Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

Classification Code

4330

Additional Details
Set Aside

SBA

Place of Performance

-

SourceSAM
The U.S. Army, through the Mission and Installation Contracting Command at Fort Drum (W6QM MICC-FT DRUM), has issued a combined synopsis/solicitation for the procurement of an industrial dust collection system. This opportunity, identified by procurement number W911S225U1788, seeks to acquire a robust, high-capacity dust control solution designed for commercial shop environments where simultaneous dust collection from multiple tools is required. The primary objective of this procurement is to furnish and deliver a Direct Drive Industrial Cyclone Dust Collector, or an equivalent system, with the following key specifications: a 20 horsepower U.S.-made TEFC motor (service factor 1.15), operating at 460V, three-phase, 60Hz, and pre-wired for installation. The system must feature a welded carbon steel impeller (18-inch diameter, backward inclined), a heavy-gauge, fully welded steel cyclone separator with a neutral vane inlet, and an angle iron telescoping stand for compact mounting. The dust collector should include dual 55-gallon dust bins, providing a total waste capacity of 110 gallons, and deliver a real CFM rating of 6,646 at 2.7 inches static pressure. Noise levels must not exceed 82 dBA at 10 feet. Filtration requirements specify the use of Izumi Axtar spunbond media, achieving 99.9% efficiency at 0.3–2.0 microns (with seasoned filter), and the system must be compatible with replacement filter FCK186200. The build materials are to be cold rolled steel, seam welded, and conductive for static resistance. The system must conform to NFPA compliance standards and be cETLus certified to both U.S. and Canadian product safety standards by an NRTL, specifically UL-1017 and Can/CSA-C22.2 No. 243. In addition to the main dust collection unit, the solicitation requires the inclusion of a filter plenum assembly (FXK041501A or equal), multiple precut flex hoses of varying diameters and lengths, spiral adapters, a reducer, clamp bands, and freight. All components must be delivered within a lead time of 45 days or less. The procurement is classified under NAICS code 333413 (Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing, 2022 version) and Product Service Code 4330. The acquisition is set aside for Small Business Administration (SBA) eligible vendors, emphasizing the government's commitment to supporting small business participation. Interested contractors should note that the contracting office is a federal entity, specifically an office-level organization, and all communications regarding this opportunity should be directed to the designated points of contact: Tamika Craig ([email protected], 706-545-3313) and Charles P. Tippie ([email protected], 706-545-6162). The solicitation is currently active, with a posting date of August 27, 2025, and a response deadline of September 2, 2025. Full details and updates are available on SAM.gov at https://sam.gov/opp/51df2014d5a54792a605e903735a79ad/view. This procurement represents a significant opportunity for qualified small businesses specializing in industrial air purification and dust collection systems to provide a turnkey solution that meets stringent performance, safety, and compliance standards for a demanding military shop environment. Contractors should ensure their proposed systems and components meet or exceed the specified requirements and certifications, and be prepared to deliver within the stated timeframe.