Impact Resistant Urethane Resin - Black and Tan

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

W6QM MICC-FT DRUM

Contract Value

Not provided

Codes & Classification
Solicitation Number

W911S225U1877

NAICS

325211 - Plastics Material and Resin Manufacturing

Classification Code

9330

Additional Details
Set Aside

SBA

Place of Performance

-

SourceSAM
The Mission and Installation Contracting Command at Fort Drum (W6QM MICC-FT DRUM) has issued a combined synopsis/solicitation for the procurement of impact-resistant urethane resin kits in both black and tan colors. This opportunity, identified by procurement number W911S225U1877, is classified under NAICS code 325211 (Plastics Material and Resin Manufacturing) and Product Service Code 9330. The solicitation is currently active and set aside for SBA-eligible businesses, reflecting the government’s commitment to supporting small business participation. The primary objective of this procurement is to acquire high-performance, semi-rigid urethane casting resin kits that exhibit a balance of strength, toughness, and flexibility. These materials are specifically intended for use in high-impact tooling and the fabrication of military training aids, where durability, abrasion resistance, and chemical resistance are critical. The resins must be suitable for a variety of industrial applications, ensuring versatility and reliability in demanding environments. The scope of supply includes three complete drum kits of 870 slow Black urethane casting resin and one complete drum kit of 870 slow Tan urethane casting resin. Each kit comprises two 55-gallon drums (Part A and Part B), designed for mixing at a ratio of 100A:60B by weight. The mixed resin features a low viscosity (3,500 cps), eliminating the need for vacuum degassing, and offers a pot life of 20 minutes at 73°F (23°C). The handling time is approximately 4 hours, with a full cure achieved in 48 hours at room temperature or 6 hours at 150°F (60°C), depending on the mass of the material. Key technical specifications for both the black and tan kits include: - Shore D Hardness: 63 - Die C Tear Strength: 488 pli - Ultimate Tensile Strength: 4,280 psi - Elongation at Break: 400% - Shrinkage: 0.001 in./in. - Heat Distortion Temperature: 150°F (60°C) - Izod Impact Resistance: 16.1 ft*lb/in The deliverables are structured as follows: the first two black kits must be shipped within 30 days or less from award, the third black kit is to be shipped 30 days after the initial shipment, and the tan kit must also be shipped within 30 days or less. All kits must be compatible with any brand of mold release, ensuring ease of integration into existing processes. Importantly, the vendor is required to replace, at no cost to the government, any material that fails to cure properly, underscoring the expectation of product quality and vendor accountability. The procurement is managed by the federal contracting office at Fort Drum, with Tamika Craig ([email protected], 706-545-3313) serving as the primary point of contact, and Pierre Tippie ([email protected], 706-545-6162) as the secondary contact. Interested contractors should note the response deadline of May 9, 2025. This opportunity is well-suited for manufacturers and suppliers with proven capabilities in producing and delivering industrial-grade urethane resins that meet stringent military and industrial standards. The requirement for SBA set-aside eligibility, adherence to technical specifications, and the ability to provide timely delivery and product support are essential considerations for prospective bidders. For further details and to access the official solicitation, contractors are encouraged to visit the SAM.gov opportunity page at: https://sam.gov/opp/ae8bbe7caece4ce1a1a5965318c7c8c7/view.