VACUUM PUMP,AIRCRAF

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0038325QP400

NAICS

334412 - Bare Printed Circuit Board Manufacturing

Classification Code

6625

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through its NAVSUP Weapon Systems Support (NAVSUP WSS) office, has issued a solicitation (Procurement Identifier: N0038325QP400) for the repair and overhaul of the Vacuum Pump Assembly, Aircraft (NSN: 6625-01-563-7820, Part Number: 740020-1). This procurement is classified under NAICS code 334412 (Bare Printed Circuit Board Manufacturing) and Product Service Code 6625, and is currently active with a response deadline of September 12, 2026. **Purpose and Scope** The primary objective of this solicitation is to secure a qualified contractor to perform comprehensive repair, overhaul, and testing services for the specified Vacuum Pump Assembly, which is a critical component in fielded ground support equipment. The assembly configuration is established and currently in use; therefore, any deviation from approved assemblies or materials must receive prior authorization from the designated government contracting and engineering authorities. **Key Requirements and Deliverables** The contractor will be responsible for the following core activities: - **Receipt and Evaluation:** Upon induction, the contractor must conduct a visual and functional evaluation of the Vacuum Pump Assembly, identifying any external or internal faults, missing or damaged hardware, and electrical issues. - **Fault Isolation and Repair:** Using best commercial practices, the contractor will isolate faults and perform necessary repairs to restore the assembly to operational standards. All repairs must adhere to the latest approved technical publications and repair manuals. - **Testing and Quality Assurance:** After repair, the assembly must undergo operational testing to verify compliance with specified electrical and mechanical performance parameters, including: - Motor: 115/208-230V, single phase, ½ HP, 60Hz - Motor Speed: 1,700 RPM - Pumping Speed: 200 l/min (7.0 CFM) - Ultimate Vacuum: 0.0005 mm Hg - Intake/Exhaust Fittings: NW-2 - **Documentation:** Prior to shipment, the contractor must provide a detailed data sheet outlining the identified faults, repairs performed, and a final quality assurance certification confirming the assembly’s readiness for service. - **Process Control:** The contractor is required to maintain and, upon request, provide repair, assembly, and inspection procedures, including sequential process diagrams and performance specifications, for government review and approval. - **Quality Management:** A quality system conforming to ISO 9001 or SAE AS9100 is mandatory, along with a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1 standards. - **Configuration Management:** The contractor must maintain a configuration management plan in accordance with NAVSUP WSS requirements. **Contractual and Logistical Considerations** - **Repair Turnaround Time (RTAT):** The required RTAT is 118 days after receipt of the asset at the contractor’s facility, as tracked in the Commercial Asset Visibility (CAV) system. The contractor must report all transactions within five business days of receipt. - **Throughput Constraint:** Contractors must specify their monthly repair throughput capacity for the NSN(s) involved. - **Induction Expiration:** Assets must be received for repair within 365 days of contract award; assets received after this period require bilateral agreement for repair authorization. - **Over and Above Repair (OAR) and Beyond Economical Repair (BER):** Procedures are in place for handling items requiring repairs beyond the contract scope or those deemed uneconomical to repair, including required notifications and approvals from DCMA and the Procuring Contracting Officer (PCO). - **Parts and Materials:** The contractor is responsible for supplying all necessary parts and materials, which must be new unless otherwise authorized. Cannibalization of parts is not permitted without explicit approval. - **Facility Requirements:** All repairs must be performed at the contractor’s identified facility, with proper storage conditions for both awaiting and completed assemblies. - **Packaging:** All items must be packaged in accordance with MIL-STD 2073. **Contract Administration and Communication** - **Contractual Documents:** All contracts, orders, and modifications are considered issued upon electronic transmission or mailing by the government. - **Early and Incremental Deliveries:** These are accepted and preferred by the government. - **Drawings and Technical Data:** Available upon written request from the Contract Specialist. - **Contact Information:** The primary point of contact for this solicitation is Bridget M. Murphy, reachable at 215-697-5047 or via email at [email protected]. **Special Considerations** - **No Government Furnished Property:** The government will not provide fixtures, tooling, or test equipment; the contractor must supply all necessary resources. - **No Repair Deviations:** Any deviation from approved repair procedures or use of alternative materials requires prior written approval. - **Equal Opportunity and Buy American Compliance:** The solicitation incorporates clauses for equal opportunity for workers with disabilities and compliance with Buy American and Free Trade Agreements. **Summary** This opportunity is well-suited for contractors with demonstrated experience in the repair and overhaul of complex electromechanical assemblies, robust quality management systems, and the ability to comply with stringent government requirements for documentation, configuration management, and reporting. The contract’s scope, technical requirements, and administrative provisions are designed to ensure the reliable return of critical ground support equipment to operational status, supporting the Navy’s mission readiness. Interested parties should review the full solicitation and associated documents on SAM.gov (Opportunity ID: 10fd507b874b4acf9a75fb8fe7ce4d5f) and direct any technical or contractual inquiries to the designated Contract Specialist.