STUD

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFA16

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5307

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QFA16) for the manufacture and supply of a specialized stud, classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5307. This procurement is a total small business set-aside, inviting qualified small business manufacturers with relevant experience and capabilities to participate. **Purpose and Scope** The solicited item—a stud manufactured in accordance with NAVSEA drawing 7504734, Item 62—is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured). This designation reflects its critical application in a crucial shipboard system, where the use of incorrect or defective material could result in catastrophic failure, serious personnel injury, loss of life, or loss of vital shipboard systems. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest level of reliability and safety. **Key Requirements and Deliverables** Contractors are required to manufacture and deliver the specified stud, with the following essential requirements: - **Material and Certification:** The stud must be produced from ASTM-A193, Grade B7 material, in accordance with MIL-DTL-1222. Quantitative chemical and mechanical analysis is mandatory, and full traceability from raw material to finished product must be maintained and documented. - **Testing:** Each stud must undergo and be certified for either Liquid Penetrant Inspection or Magnetic Particle Inspection (Wet Method), performed per T9074-AS-GIB-010/271 and sampled according to MIL-DTL-1222. - **Traceability:** Each shipment must include one additional fastener per uniquely identified heat/lot, with complete traceability maintained. All fasteners must be permanently marked for traceability in accordance with MIL-STD-792 and MIL-DTL-1222. - **Quality System:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The quality system and procedures are subject to government review and approval. - **Documentation:** A Certificate of Compliance (C of C) is required for each shipment, demonstrating full compliance with all specifications, traceability to each item, and listing all contractually invoked conformance/compliance tests performed. Test certifications must reference the applicable standards and acceptance criteria. - **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - **Mercury-Free Requirement:** No mercury or mercury-containing compounds may be intentionally added or come into contact with the supplied hardware. - **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements. - **Government Source Inspection:** Government Quality Assurance (GQA) at source is required, and the place of performance may not be changed without authorization. - **Data Submission:** Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, via the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance is received. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), Department of the Navy, Department of Defense - **Primary Contact:** Lydia M. Shaloka, Telephone: 215-697-4717, Email: [email protected] - **Notice URL:** [https://sam.gov/opp/2117588466a94e9c8ff93ff27bd836b3/view](https://sam.gov/opp/2117588466a94e9c8ff93ff27bd836b3) **Procurement Type and Special Considerations** This is a fixed-price solicitation, issued under Emergency Acquisition Flexibilities (EAF), and is a "DO" rated order under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense. The procurement is set aside exclusively for small businesses. Past performance will be considered in the evaluation of offers, and compliance with the Buy American Act, Free Trade Agreements, and Balance of Payments Program is required. **Constant Elements Over Contract Lifecycle** Throughout the contract, the following elements will remain constant: - The requirement for strict adherence to technical specifications, drawings, and referenced standards. - The necessity for comprehensive traceability, certification, and quality assurance documentation. - The obligation to maintain and provide a compliant quality system, subject to government audit and approval. - The prohibition of mercury and the requirement for proper material marking and packaging. - The need for government review and acceptance of certification data prior to shipment. - The application of configuration control and the process for waivers, deviations, and engineering changes. **Summary for Contractors** This opportunity is suited for small business manufacturers with robust quality assurance programs, experience in producing high-reliability fasteners for defense applications, and the capability to manage detailed traceability and certification requirements. Contractors must be prepared to comply with rigorous government oversight, documentation, and configuration control processes. The contract supports critical national defense objectives and requires timely, compliant delivery of a safety-critical shipboard component. Interested parties should review the full solicitation and referenced documents for detailed technical and quality requirements and contact the primary POC for access to drawings or further clarification.