VALVE,BALL
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010425QZD37
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Naval Supply Systems Command (NAVSUP) Weapon Systems Support, Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010425QZD37) for the manufacture and delivery of a highly specialized 1/4 inch Ball Valve, classified under Product Service Code 4820 (Valves, Nonpowered) and NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing). This procurement is a Total Small Business Set-Aside, inviting only qualified small business concerns to participate.
**Purpose and Scope**
The ball valve to be procured is a critical component intended for use in a crucial shipboard system. The nature of its application means that any failure or defect could result in catastrophic consequences, including serious personnel injury, loss of life, or loss of vital shipboard systems. As such, the item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures to ensure the delivery of correct and fully compliant material.
**Key Requirements and Deliverables**
- **Technical Specifications:** The 1/4 inch Ball Valve must be manufactured in strict accordance with Naval Sea Systems Command Drawing 845-7285244, Assembly "IAZ," with further requirements and modifications as detailed in the solicitation. The valve and its components must meet a comprehensive set of material, testing, and certification standards, including but not limited to MIL-STD-1330 for oxygen cleaning, ASTM and MIL specifications for materials, and detailed requirements for pressure, surface finish, and marking.
- **Oxygen Cleaning:** The valve must be cleaned, tested, packaged, and labeled by trained personnel per MIL-STD-1330, with Navy Source Certification required prior to O2 cleaning.
- **Material Traceability and Certification:** Full traceability from raw material to finished product is mandatory, with unique markings and comprehensive certification data required for all metallic and non-metallic components. Certifications must include quantitative chemical and mechanical analysis, and all test reports must be traceable to the specific items delivered.
- **Testing and Inspection:** The contract requires a range of tests, including liquid penetrant inspection, intergranular corrosion testing, pressure testing, ultrasonic inspection, and wedge tensile testing for fasteners. All threads must be inspected per FED-STD-H28 or ASME B1 series. Non-destructive testing procedures must be reviewed by the DCMA Quality Assurance Representative (QAR).
- **Quality Assurance:** The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Government Quality Assurance at source is required, and the contractor’s quality system and procedures are subject to review and approval prior to award and throughout the contract lifecycle.
- **Configuration Control:** The contractor is responsible for maintaining the total equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- **Packaging and Marking:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements. Each assembly must be properly identified, and fasteners must be marked per MIL-DTL-1222 and MIL-STD-792.
- **Documentation and Data Deliverables:** Submission of all certification data (CDRLs) is required at least 20 days prior to delivery, with final delivery due within 210 days of contract award. Certificates of Compliance, test certifications, and inspection records must be provided as specified.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support, Mechanicsburg (Federal Office)
- **Primary Contact:** Amanda A. Gowdy, Phone: (717) 605-7562, Email: [email protected]
**Procurement Type and Special Considerations**
- **Set-Aside:** This solicitation is a Total Small Business Set-Aside, restricting competition to small business concerns.
- **Contract Type:** The resultant award will be a fixed-price contract, issued bilaterally and requiring the contractor’s written acceptance.
- **Priority Rating:** The order is rated “DX” under the Defense Priorities and Allocations System (DPAS), certifying it for national defense use and requiring priority performance.
- **Quality and Safety Emphasis:** Due to the critical safety item (CSI) designation, the procurement invokes extensive quality assurance, traceability, and configuration control requirements. Mercury and mercury-containing compounds are strictly prohibited.
- **Drawings and Data Access:** Technical drawings are available via restricted access on SAM.gov; contractors must request access and notify the contracting POC upon doing so.
**Constant Elements Over Contract Lifecycle**
Throughout the contract, the following elements will remain constant:
- The requirement for strict adherence to technical specifications, drawings, and referenced standards.
- The necessity for comprehensive material traceability, certification, and quality assurance documentation.
- The obligation to maintain configuration control and submit any waivers, deviations, or engineering changes for government approval.
- The expectation of government source inspection and the maintenance of a robust, auditable quality system.
- The prohibition of mercury and the requirement for oxygen cleaning and Navy Source Certification.
**Summary for Contractors**
This opportunity is suited for small businesses with demonstrated expertise in manufacturing high-reliability, precision metal valves for naval or similar critical applications. Contractors must have robust quality management systems, experience with stringent military and federal specifications, and the capability to manage detailed traceability and certification requirements. The contract’s critical safety designation, DPAS priority, and comprehensive quality assurance provisions underscore the importance of proven performance and compliance in all aspects of production and documentation.
Interested parties should review the full solicitation and associated drawings (available on SAM.gov) and ensure they can meet all technical, quality, and delivery requirements before submitting an offer. For further information or to request access to restricted documents, contact Amanda A. Gowdy at the details provided above.