60mm (M27), 81mm (M24 and M28), 120mm (M31) Mortar Tail Fins

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

W6QK ACC-PICA

Contract Value

Not provided

Codes & Classification
Solicitation Number

W15QKN25R0004

NAICS

332993 - Ammunition (except Small Arms) Manufacturing

Classification Code

1315

Additional Details
Set Aside

SBA

Place of Performance

-

SourceSAM
Documents4
The U.S. Army Contracting Command-New Jersey (ACC-NJ), operating from Picatinny Arsenal, NJ, has issued a formal Request for Proposal (RFP) under procurement identifier W15QKN25R0004 for the manufacture, testing, packaging, and delivery of mortar tail fins for the 60mm (M27), 81mm (M24 and M28), and 120mm (M31) mortar cartridge families. This procurement directly supports the Project Manager, Combat Ammunition Systems (PM CAS), and is classified under NAICS code 332993, Ammunition (except Small Arms) Manufacturing. The scope of this solicitation encompasses the production of several distinct mortar tail fin assemblies, each with precise engineering and material requirements to ensure compatibility with various high explosive (HE), full range practice cartridge (FRPC), illumination, and smoke mortar rounds. The deliverables include: - **M27 Mortar Tail Fin Assemblies**: Designed for the 60mm mortar family, these one-piece fins are manufactured from 2014-T65 or 6070-T6 aluminum (ASTM B221), measuring 5.40 inches in length and 2.375 inches in diameter at the blades. Each fin features six extruded blades, canted at 5 degrees, with a hollow, threaded center to accommodate the M702 Ignition Cartridge and drilled flash holes for venting. - **M24 Mortar Tail Fin Assemblies**: Supporting the 81mm mortar family, these two-piece assemblies consist of a fin component (aluminum alloy per ASTM B221, hollow extrusions not permitted) and a housing component (Aluminum 7075-T6, die forging per ASTM B247 or rod per ASTM B211/B221). The assembly measures 7.4 inches in length and 3 inches in diameter at the blades, with six blades canted at 5 degrees, 17 minutes. Both components are anodized per MIL-STD-171 and must pass rigorous salt spray tests (336 hours for first articles, 96 hours during production). - **M28 Mortar Tail Fin Assemblies**: Also for the 81mm family, these two-piece assemblies use extruded aluminum alloy 2014-T4 (ASTM B221) for the fin and aluminum alloy bar 7075-TT76 (ASTM B221) for the housing. The assembly is 8.545 inches long and 3.150 inches in diameter at the blades, with six blades canted at 4 degrees, 46 minutes. Anodizing and salt spray testing requirements mirror those of the M24. - **M31 Mortar Tail Fin Assemblies**: Intended for the 120mm mortar family, the M31 is an eight-bladed, two-piece assembly (fin and tube), approximately 9.25 inches long and 4.75 inches in diameter. The fin is machined from 2024-T8511 aluminum extrusion, and the tube from 2024-T3511 aluminum. The assembly is anodized per MIL-STD-171 and must meet the same salt spray test standards as the other fins. All assemblies are engineered to precise tolerances, with specific requirements for blade cant, anodizing, and corrosion resistance. The assemblies must facilitate the secure insertion and venting of ignition cartridges, with detailed specifications for threading and flash hole placement. This procurement is set aside for Small Business Administration (SBA) eligible entities, reflecting the Army’s commitment to supporting small business participation in defense manufacturing. Interested contractors must demonstrate the capability to meet stringent material, manufacturing, and quality assurance standards, including first article testing and ongoing production testing as specified in the RFP and associated Contract Data Requirements Lists (CDRLs). The solicitation has undergone several amendments, primarily to clarify technical requirements, update attachments (including engineering drawings), and extend the proposal submission deadline. The final deadline for proposal submission is Monday, 9 June 2025, at 1:00 pm Eastern Daylight Time. No further extensions will be granted. The contracting office for this opportunity is W6QK ACC-PICA, a federal entity. The primary point of contact for this solicitation is Michael Kline ([email protected], 520-674-1381), with Aja Barnett ([email protected], 520-669-8592) serving as the secondary contact. Contractors considering this opportunity should review all posted amendments and attachments via the PIEE Solicitation Module link provided in the notice. The technical complexity, material requirements, and quality assurance provisions are central to successful contract performance and will remain consistent throughout the contract lifecycle. For further details and to access solicitation documents, contractors should refer to the official SAM.gov listing at: https://sam.gov/opp/d70e3bc2e6844becbc1b8c7357e1d5f2/view.