ELECTRIC SCISSOR LIFT
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
W6QM MICC-FT DRUM
Contract Value
Not provided
Codes & Classification
Solicitation Number
W911S225U0696
NAICS
333618 - Other Engine Equipment Manufacturing
Classification Code
3895
Additional Details
The Mission and Installation Contracting Command at Fort Drum, New York (W6QM MICC-FT DRUM), has issued a Combined Synopsis/Solicitation for the procurement of an electric scissor lift. This opportunity, identified by procurement number W911S225U0696, is currently active and is set aside for Small Business Administration (SBA) eligible vendors, in accordance with federal set-aside requirements.
The primary objective of this procurement is to acquire a robust, high-performance electric platform scissor lift to support operational needs at Fort Drum. The scope of supply encompasses a comprehensive list of technical and functional requirements designed to ensure safety, reliability, and operational efficiency. Key specifications include a hydraulic front wheel drive system, a maximum platform height of 42 inches, and a minimum raised overall height of 19 feet. The machine must not exceed a width of 32 inches and a total weight of 7,000 pounds, ensuring maneuverability and compatibility with site constraints.
Safety and operational features are emphasized, including a pothole protection system with specified ground clearances (minimum 3 inches raised, maximum 1 inch deployed), non-marring tires, and foldable side rails. The platform must support a weight capacity of 500 pounds, with a slide extension capable of at least 36 inches and a maximum extension weight capacity of 275 pounds. Additional requirements include a 27-amp automatic onboard battery charger, four 6-volt AGM deep cycle batteries mounted in a pull-out tray, and a minimum outside turning radius of 5 feet 5 inches.
The lift must be equipped with an onboard 900-watt inverter, a 110-volt AC receptacle on the platform, an hour meter, forklift pockets, diamond tread steel deck, lifting and tie-down points, removable platform controls, and an IUID label. Delivery is required within 60 days after receipt of order (ARO), and the equipment must be covered by a 12-month unlimited hours warranty. The contractor is also expected to provide two copies each of operators, parts, and service manuals.
The procurement is classified under NAICS Code 333618 (Other Engine Equipment Manufacturing, 2022 version) and Product Service Code 3895. The designated delivery location is Fort Drum, New York.
Interested vendors should note the SBA set-aside requirement and ensure compliance with all specified technical and delivery criteria. The contracting office is available for inquiries, with primary contact Carrie Lawton ([email protected], 7721065) and secondary contact Joy Davis ([email protected], 3157729900). The solicitation was posted on June 5, 2025, with responses due by 22:05 the same day. Further details and updates can be accessed via the official SAM.gov opportunity listing at https://sam.gov/opp/d40a1387c4d74539b0f6d058db18fc68/view.
This procurement represents a well-defined requirement for a specialized piece of equipment, with clear expectations regarding performance, safety, and support documentation. Contractors with relevant manufacturing capabilities and experience in supplying electric scissor lifts to federal entities are encouraged to review the full solicitation and consider submitting a response.