M--TRAIL BRIDGE BLACKLAND PRAIRIE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

SER WEST(52000)

Contract Value

Not provided

Codes & Classification
Solicitation Number

140P5225R0018

NAICS

237310 - Highway, Street, and Bridge Construction

Classification Code

M1LB

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The National Park Service, through its SER WEST (52000) office, has issued a combined synopsis/solicitation for the construction of a trail bridge within the Blackland Prairie area. This procurement, identified by number 140P5225R0018, is classified under NAICS code 237310, which pertains to Highway, Street, and Bridge Construction, and carries the Product Service Code M1LB. The opportunity is currently active and is posted on SAM.gov, with bids due by July 17, 2025, at 2:00 PM Central Time. The scope of this project centers on the fabrication and installation of a pre-fabricated trail bridge. The intended outcome is to provide a durable, safe, and corrosion-resistant crossing that supports the recreational and conservation objectives of the Blackland Prairie. The solicitation includes specific technical requirements and clarifications, as outlined in Amendment 0002, which addresses contractor questions regarding delegated design responsibilities and construction details. Key requirements for this project include: - The delegated design is limited to minor details associated with the pre-fabricated bridge elements, which are to be manufactured by a qualified supplier. All other design aspects must adhere strictly to the provided plans, with minimal deviation permitted. - Diaphragms may be bolted rather than welded to the girders, offering flexibility in assembly. - Diaphragm connection brackets are required on both sides of each diaphragm, as well as at each end. - Bearing plates must be welded to the girders, ensuring structural integrity. - All steel components—including hardware, girders, bearing plates, diaphragms, and nailer angles—should be coated to minimize corrosion. Acceptable coatings include galvanization (zinc), epoxy, or powder coating. - Steel angle nailer brackets are required, with nailers spaced at a maximum of 5 feet on center along the bridge length. Closer spacing is permissible to achieve even distribution. The contracting entity is a federal office, and the primary point of contact for this opportunity is Tara Clark, who can be reached at [email protected] or by phone at 662-372-0363. Interested contractors should review all six attachments available on the SAM.gov posting for complete specifications and requirements. This procurement is a combined synopsis/solicitation, streamlining the process for interested vendors. There are no explicit set-aside requirements or special considerations noted in the provided information. Contractors should be prepared to deliver a high-quality, corrosion-resistant bridge structure that meets all specified design and construction standards, with limited scope for design modifications except as explicitly allowed for pre-fabricated elements. Overall, this opportunity is well-suited for contractors experienced in bridge construction, particularly those with capabilities in pre-fabricated structures and protective coatings. The project’s requirements and deliverables are clearly defined, and the contracting entity emphasizes adherence to established plans and specifications throughout the contract lifecycle.
Documents6