PARTS KIT,BALL VALV
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010425QFF15
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Naval Supply Systems Command (NAVSUP) Weapon Systems Support, Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010425QFF15) for the supply of a Parts Kit for a 1-inch Ball Valve, intended for use in a critical shipboard system. This procurement falls under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, reflecting its focus on specialized valve components for naval applications.
**Purpose and Scope**
The primary objective of this procurement is to acquire a parts kit comprising one ball (Find No. IB5) and two matching seats (Find No. IB36), manufactured in strict accordance with NAVSEA Drawing 6758076 and all associated Electric Boat Engineering Releases (ERs) specified in the contract. The material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), underscoring its criticality to shipboard safety and operational integrity. The use of incorrect or defective material could result in catastrophic failure, serious injury, or loss of vital ship systems, making rigorous quality assurance and traceability essential throughout the contract lifecycle.
**Key Requirements and Deliverables**
- **Materials and Certification:**
- The ball must be fabricated from SAE-AMS-6931 material, with quantitative chemical and mechanical analysis required. For bars, forgings, and forging stock over 10", mechanical properties must conform to drawing specifications or, if absent, to SAE-AMS-6931 Table 2.
- Seats must be made from Torlon 4503, 4203, or 4203L (unfilled polyamide-imide) per Electric Boat Specification 4147, with a Certificate of Compliance required.
- **Testing and Inspection:**
- Each ball must undergo a hydrostatic test (30 minutes at 1275 psi, stem hole plugged) with no leakage or deformation. Dye penetrant inspection may substitute for manufacturers lacking hydrostatic test fixtures.
- Non-destructive testing is required for weld repairs and production welds, per applicable fabrication specifications.
- Pressure and time tolerances for testing are strictly defined, with detailed requirements for different pressure ranges and durations.
- **Coating and Surface Finish:**
- Teflon coating of balls must comply with Chemours Company (formerly DuPont) specifications and NAVSEA drawing notes.
- Spherical surface waviness of sealing areas must not exceed 0.0005 inches per inch, verified prior to Teflon coating.
- **Marking and Traceability:**
- Permanent traceability markings are required on all components, with specific marking locations and methods detailed for both metallic and non-metallic parts.
- Certification data must be submitted and accepted prior to shipment, ensuring full traceability from raw material to finished product.
- **Quality Assurance:**
- Contractors must maintain a quality system in accordance with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025.
- Government Quality Assurance at source is mandated, and contractors must facilitate audits and inspections by NAVSUP or DCMA representatives.
- All inspection and test records must be maintained and made available for government review.
- **Configuration Control:**
- Contractors are responsible for maintaining baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface.
- Waivers and deviations require prior approval from the Contracting Officer, with detailed documentation and classification.
- **Packaging:**
- Preservation, packaging, and marking must comply with MIL-STD-2073 and contract schedule requirements.
- **Mercury-Free Requirement:**
- No mercury or mercury-containing compounds may be used or come into contact with supplied hardware.
**Contracting Entity and Contact Information**
- **Entity:** NAVSUP Weapon Systems Support, Mechanicsburg (Federal Office)
- **Primary Contact:** Scott R. Youngblood, 717-605-2379, [email protected]
- **Location:** Mechanicsburg, PA
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/010d15057cf148d7831428974af10e93/view)
**Procurement Type and Special Considerations**
This solicitation is issued under full and open competition, with the previous small business set-aside dissolved. The contract will be awarded pursuant to Emergency Acquisition Flexibilities and is designated as a DO-rated order under the Defense Priorities and Allocations System (DPAS), indicating its priority for national defense use. All certification documentation must be submitted via Wide Area Work Flow (WAWF) and accepted by Portsmouth Naval Shipyard prior to shipment.
**Constant Elements Throughout the Contract Lifecycle**
- Adherence to specified drawings, specifications, and referenced standards (including MIL-STD, ANSI, ISO, and NAVSEA documents).
- Maintenance of rigorous quality assurance, traceability, and configuration control processes.
- Compliance with government inspection, certification, and acceptance procedures.
- Prohibition of mercury and strict control of material marking and handling.
- Requirement for detailed documentation, including certificates of compliance, test certifications, and material traceability reports.
**Summary for Contractors**
Contractors considering this opportunity should possess robust capabilities in precision manufacturing, quality assurance, and traceability for critical shipboard valve components. Experience with NAVSEA specifications, military standards, and government source inspection is essential. The contract demands meticulous documentation, strict adherence to material and testing requirements, and readiness for government audits and configuration control. The scope and requirements are designed to ensure the highest level of safety and reliability for naval applications, making this an opportunity suited for organizations with proven expertise in defense-grade valve and pipe fitting manufacturing.
For further information or to discuss technical requirements, contractors are encouraged to contact the NAVSUP WSS representative listed above.