PARTS KIT,BALL VALV

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QZA02

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Naval Supply Systems Command (NAVSUP) Weapon Systems Support, Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QZA02) for the supply of a specialized "Parts Kit, Ball Valve." This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, reflecting its focus on critical shipboard valve components. The solicitation is active, with responses due by January 22, 2026. **Purpose and Scope** The primary objective of this procurement is to acquire parts kits for 6-inch ball valves, intended for use in vital shipboard systems. The nature of these systems means that any failure due to incorrect or defective material could result in severe injury, loss of life, or catastrophic damage to the ship. As such, the material is designated as "SPECIAL EMPHASIS" (Level I, Scope of Certification, or Quality Assured), invoking stringent control procedures to ensure the delivery of correct and compliant material. **Key Requirements and Deliverables** The required parts kit must conform to NAVSEA drawing 7285216 and consist of: - One Ball (Piece 20) - Two mating Seats (Piece 21), with details specified in NAVSEA drawings 8617511 (Ball piece 66) and 7285297 (Seats piece 32) Material specifications are as follows: - **Ball**: SAE-AMS-6931 or centrifugally cast 6AL-4V, ASTM-B367, Grade C-5, with mechanical properties as specified. - **Seats**: Delrin (Dupont AF DE588, Teflon Filled Acetal) with defined physical and mechanical properties, including specific gravity, melting point, tensile strength, impact resistance, compressive stress, water absorption, hardness, Teflon fiber content, and dimensional stability. Testing and certification requirements include: - Hydrostatic testing of each ball at 1050 PSI for 30 minutes, with no leakage or deformation. - Dye penetrant inspection and non-destructive testing as applicable. - Pressure and time tolerances for tests are strictly defined. - Surface finish and waviness requirements for the ball, including detailed finishing and polishing procedures. - Seat stack height measurement and visual inspection criteria. - Welding and brazing must comply with specific NAVSEA and military standards, with procedures and qualification data submitted for approval. Traceability and certification are paramount: - All materials must be traceable to certification test reports via unique markings. - Certificates of compliance must be provided, showing full traceability and compliance with all specifications and tests. - Mercury and mercury-containing compounds are strictly prohibited. Quality assurance is comprehensive: - Contractors must maintain a quality system in accordance with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. - Government quality assurance at source is required, and contractors must make facilities available for audit. - Subcontractor inspection and control requirements are detailed, including periodic reviews and documentation. Packaging, preservation, and marking must comply with MIL-STD 2073 and contract-specific instructions. **Contracting Entity and Contact Information** - **Entity**: NAVSUP Weapon Systems Support Mechanicsburg (Federal Office) - **Primary Contact**: Robert H. Langel - Telephone: 717-605-3353 - Email: [email protected] - **Location**: Mechanicsburg, PA **Procurement Type and Special Considerations** This is a fixed-price solicitation, set aside exclusively for small businesses (as indicated by the "Total Small Business Set-Aside" clause). The procurement is subject to Emergency Acquisition Flexibilities (EAF), and the resultant award will be issued bilaterally, requiring written contractor acceptance. The contract will be DO certified under the Defense Priorities and Allocations System (DPAS), signifying its importance to national defense. All contractual documents will be considered "issued" when transmitted by mail, facsimile, or electronic means. Contractors must provide facility details if packaging occurs at a location different from their address. **Evaluation and Compliance** Past performance will be considered in accordance with FAR 13.106(a)(2). Data Item A001 (Inspection and Test Plan) may be waived if already on file at NAVSUP WSS Mechanicsburg. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance. **Constant Elements Over Contract Lifecycle** - Adherence to specified drawings, standards, and material properties - Maintenance of traceability and certification for all materials - Compliance with quality assurance and inspection protocols - Observance of packaging, marking, and documentation requirements - Engagement with government representatives for inspection and acceptance - Strict prohibition of mercury contamination - Ongoing configuration control and change management procedures **Summary for Contractors** This opportunity is suited for small businesses with proven capabilities in precision manufacturing, quality assurance, and compliance with military and NAVSEA standards for critical shipboard components. The contract demands rigorous documentation, traceability, and testing, with a strong emphasis on safety and reliability. Contractors must be prepared for thorough government oversight and maintain robust quality systems throughout the contract lifecycle. For further details and to access solicitation documents, visit the official notice at [SAM.gov](https://sam.gov/opp/f2f535e288804f6789f1553b58bc2e5f/view).