53--LOCKNUT
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010423QNC63
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5310
Additional Details
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation for the procurement of locknuts, specifically National Stock Number (NSN) 5310-016338457, in accordance with Emerson Drawing 20307, Find Number 15. This procurement is classified under NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5310, reflecting its focus on critical shipboard hardware components.
**Purpose and Scope**
The locknuts covered by this contract are designated as SPECIAL EMPHASIS material, intended for use in crucial shipboard systems. The integrity and reliability of these components are paramount, as the use of incorrect or defective material could result in catastrophic failure, serious personnel injury, loss of life, or loss of vital shipboard systems. As such, the procurement invokes stringent material control and quality assurance procedures to ensure the receipt of correct and compliant material.
**Key Requirements and Objectives**
- **Quantity and Delivery:** The solicitation requests a total of 10 locknuts (reduced from an initial quantity of 25), with a final delivery schedule of 186 days after contract award. All certification data (CDRLs) must be submitted 20 days prior to delivery, with review and acceptance by Portsmouth Naval Shipyard (PNSY) within 6 working days.
- **Technical Specifications:** Locknuts must be manufactured strictly in accordance with Emerson Drawing 20307, Find Number 15, with additional requirements and modifications as specified in the solicitation. The government does not own the drawings or data rights for this NSN; contractors must obtain all referenced documents and specifications independently.
- **Thread Inspection:** All threads must be inspected per FED-STD-H28 series, with System 21 as the minimum requirement unless otherwise specified. Internal threads must be formed by cutting; cold forming is not permitted.
- **Material Restrictions:** Mercury and mercury-containing compounds are strictly prohibited in the manufacturing process.
- **Configuration Control:** Contractors must maintain baseline configuration and provide proprietary design drawings in electronic format. All waivers, deviations, and engineering change proposals (ECPs) require government review and approval, with detailed documentation and traceability.
- **Traceability and Certification:** Permanent traceability markings must be applied to each item, and a certificate of compliance is required, demonstrating full adherence to all specifications and requirements. Objective Quality Evidence (OQE) must be maintained and inspected for completeness and legibility.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The quality system is subject to government evaluation and audit throughout the contract lifecycle.
- **Inspection and Acceptance:** Government Source Inspection and Acceptance (G-S I&A) is mandatory. Contractors must coordinate with the Defense Contract Management Agency (DCMA) for inspection planning. Subcontractor supplies are also subject to government inspection at source.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and contract schedule requirements.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), a federal office under the Department of Defense, Department of the Navy.
- **Primary Contact:** Noelle M. Smith, Telephone: 717-605-3992, Email: [email protected]
- **Alternate Contact:** Tiana Hammaker, Email: [email protected]
- **Submission Method:** Quotes must be submitted via email to Rachel Snyder at [email protected]. This is the only authorized submission method.
**Procurement Type and Special Considerations**
- **Solicitation Type:** This is a fixed-price procurement, with contractors required to specify whether their quoted price is firm-fixed price (FFP) or not-to-exceed (NTE).
- **Set-Aside Status:** The Small Business Set-Aside requirement has been dissolved due to the limited number of capable business concerns for this NSN.
- **Distributor/Dealer Requirements:** Distributors must provide a letter from the manufacturer confirming authorized status. Dealers must submit a statement identifying their firm as a dealer, along with the OEM’s name, CAGE code, and part number.
- **Quote Validity:** Quotes must remain valid for eight months from the date of submission.
- **Data Submission:** Certification documentation must be submitted via Wide Area Work Flow (WAWF), with specific instructions for shipping, inspection, and acceptance.
**Constant Elements Throughout Contract Lifecycle**
- The locknuts are critical safety items (CSI) for shipboard systems, requiring rigorous quality assurance, traceability, and configuration control.
- All technical requirements, inspection protocols, and certification standards are defined by referenced federal, military, and commercial specifications, which must be obtained and adhered to by the contractor.
- Government oversight, including source inspection and acceptance, is a constant requirement, with coordination through DCMA and NAVSUP WSS.
- All contractual documents and communications are considered issued upon electronic transmission, with bilateral agreement required for contract execution.
**Summary for Contractors**
This opportunity is highly specialized, demanding strict adherence to technical specifications, quality assurance standards, and traceability protocols. Contractors must demonstrate robust manufacturing capabilities, quality systems, and experience with critical safety items for naval applications. The procurement is not set aside for small businesses, and only authorized distributors or dealers with proper documentation will be considered. Interested parties should review the solicitation in detail, ensure compliance with all requirements, and submit their quotes and supporting documentation as specified.
For further information and to access the solicitation, visit the official notice at [SAM.gov](https://sam.gov/opp/f807c12a86424f24bf76c89efcb5be32/view).