59--CABLE ASSY, SPEC
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010423QND25
NAICS
335931 - Current-Carrying Wiring Device Manufacturing
Classification Code
5995
Additional Details
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010423QND25) for the manufacture and delivery of a specialized cable assembly, referenced as "CABLE ASSY, SPEC." This procurement is classified under NAICS code 335931 (Current-Carrying Wiring Device Manufacturing) and Product Service Code 5995, indicating its focus on electrical cable assemblies for use in critical shipboard systems.
**Purpose and Scope**
The cable assembly to be procured is designated as "Special Emphasis Material" (Level I, Scope of Certification, or Quality Assured), reflecting its application in vital shipboard systems where material failure could result in catastrophic consequences, including serious personnel injury, loss of life, or loss of the ship. As such, the procurement invokes stringent control procedures and quality assurance requirements to ensure the delivery of correct and fully compliant material.
**Key Requirements and Deliverables**
- **Technical Specifications:** The cable assembly must be manufactured in strict accordance with NAVSEA drawings 5486639 (item 185) and 5486641 (P/N K-HNG52000), as well as Contract Support Library references CSD313 and CSD321. Additional requirements are detailed in the Contract Support Library (CSD023, CSD024, CSD313, CSD321) accessible via the Electronic Contractor Data Submission (ECDS) system.
- **Material and Process Controls:** The assembly contains non-metallic materials that must meet the toxicity and flammability standards of NAVSEA SS800-AG-MAN-010/P-9290. Connector plug bodies require a Non-Conductive Coating (NCC) plasma spray per NAVSEA S9320-AM-PRO-030/MLDG, performed by an approved vendor.
- **First Article Testing (FAT):** A First Article Test is mandatory, requiring one complete cable assembly to undergo destructive testing per MIL-DTL-24231 Type 1 and additional hydrostatic, insulation resistance, and dielectric tests as specified.
- **Quality Conformance Testing:** Each production unit must pass quality conformance tests, including hydrostatic pressure, insulation resistance, and dielectric strength, with detailed test parameters provided.
- **Traceability and Certification:** Full traceability from material to Objective Quality Evidence (OQE) is required. Each unit must be permanently marked, and a comprehensive Certificate of Compliance (Special Emphasis C of C) must be submitted, detailing traceability, compliance, and test results.
- **Quality System:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration per ISO-10012 or ANSI-Z540.3/ISO-17025. The system is subject to government audit and approval.
- **Government Source Inspection:** Inspection and acceptance will be performed at the source by a government representative, typically from the Defense Contract Management Agency (DCMA).
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, PA
- **Department/Agency:** Department of Defense, Department of the Navy
- **Primary Contact:** Noelle M. Smith, Telephone: 717-605-3992, Email: [email protected]
- **Technical/Submission Contact:** Rachel Snyder, Telephone: 717-605-7296, Email: [email protected]
**Procurement Type and Special Considerations**
- **Solicitation Type:** This is a formal solicitation for a fixed-price supply contract.
- **Set-Aside Status:** The original small business set-aside has been dissolved; the opportunity is now open to all qualified vendors.
- **Submission Instructions:** Quotes must be submitted via email to Rachel Snyder; this is the only authorized method.
- **First Article and Data Requirements:** Submission of all certification data (CDRLs) is required 20 days prior to delivery, with review and acceptance by Portsmouth Naval Shipyard. No material may be shipped prior to acceptance.
- **Amendments:** The required quantity has been adjusted from 2 to 8 units. Offer due dates have been extended multiple times; the current response deadline is 20 March 2026 at 4:30 PM EST.
**Constant Elements Over Contract Lifecycle**
- The cable assembly’s criticality to shipboard safety and system integrity will remain unchanged, necessitating ongoing adherence to the highest standards of material control, traceability, and quality assurance.
- The requirement for government source inspection, comprehensive documentation, and strict configuration control will persist throughout the contract.
- All deliverables must comply with the specified drawings, standards, and referenced documents, with no deviation permitted without prior government approval.
- The contractor’s quality system and traceability protocols will be subject to continuous oversight and must be maintained for the duration of the contract.
**Summary for Contractors**
This opportunity is best suited for manufacturers with demonstrated experience in producing high-reliability, specification-driven cable assemblies for defense or similarly regulated industries. Prospective contractors must have robust quality management systems, the ability to perform or coordinate specialized processes (such as NCC plasma spray and cable molding by approved vendors), and the capacity to manage detailed traceability and certification requirements. The contract’s emphasis on first article testing, government source inspection, and configuration control underscores the need for disciplined project management and technical compliance. Interested parties should review the full solicitation and referenced documents to ensure alignment with their capabilities and compliance infrastructure.
For further details and to access the solicitation, visit the official notice at [SAM.gov](https://sam.gov/opp/51dd0082eec24de1986a98aa16682259/view).