53--BOLT

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010424QNA41

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5306

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010424QNA41) for the manufacture and supply of a specialized BOLT, classified under Product Service Code 5306 (Bolts) and NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing). This procurement is critical in nature, supporting a crucial shipboard system where material failure could result in severe consequences, including personnel injury, loss of life, or loss of vital shipboard systems. As such, the BOLT is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures. **Purpose and Scope** The primary objective of this procurement is to ensure the reliable supply of a BOLT manufactured in strict accordance with Emerson drawing 20307 Find No. 9, P/N 06726027156, as further detailed and modified within the solicitation. The supplied material will be integrated into critical shipboard systems, necessitating the highest standards of quality, traceability, and compliance with all applicable specifications and drawings. The scope encompasses not only the manufacture and delivery of the BOLT but also comprehensive documentation, certification, and adherence to configuration and quality control requirements. **Key Requirements and Deliverables** - **Manufacturing Standards:** The BOLT must be produced per the referenced Emerson drawing and must comply with all amplified or modified requirements specified in the solicitation. - **Thread Inspection:** All threads must be inspected in accordance with FED-STD-H28 series or commercial equivalents (ASME B1 series). System 21 of FED-STD-H28/20 is the minimum requirement unless otherwise specified. - **Material Restrictions:** The use of mercury or mercury-containing compounds is strictly prohibited; any contamination will result in rejection. - **Configuration Control:** Contractors must maintain baseline configuration and provide up-to-date proprietary drawings in electronic format. All waivers, deviations, and engineering changes require prior government approval and must be documented and submitted as specified. - **Certification and Traceability:** A Certificate of Compliance is mandatory, certifying full compliance with all requirements and traceability to each item. Traceability markings must be permanently applied per MIL-STD-792 or affixed tags, and maintained through all processing steps, including subcontracted operations. - **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The system and products are subject to government evaluation, verification, and source inspection. - **Inspection and Testing:** Final inspection must ensure zero defects, with lot acceptance based on zero defects and rejection upon one defect. Sampling plans must follow applicable military or federal standards, or ANSI/ASQ-Z1.4 if not specified. All Objective Quality Evidence (OQE) and certification test reports must be 100% inspected for completeness and legibility. - **Packaging:** Preservation, packaging, and marking must comply with MIL-STD 2073 and any additional contract-specific requirements. - **Data and Documentation:** Submission of certification data (CDRLs) is required 20 days prior to delivery for review and acceptance by Portsmouth Naval Shipyard. No material may be shipped prior to receipt of acceptance. All documentation must be submitted via Wide Area Work Flow (WAWF) and notification sent to the designated email. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), Department of the Navy, Department of Defense - **Primary Contact:** Noelle M. Smith, Telephone: 717-605-3992, Email: [email protected] - **Alternate Contact:** Rachel E. Snyder, Telephone: 717-605-7296, Email: [email protected] **Procurement Type and Special Considerations** This is a fixed-price supply contract solicitation, with a strong emphasis on quality assurance, configuration control, and traceability due to the critical safety implications of the end-use application. The procurement is subject to the Buy American Act, Free Trade Agreements, and Balance of Payments Program requirements. The contract includes a one-year warranty from the date of last delivery and mandates compliance with all applicable federal, military, and commercial standards as referenced. **Additional Notes** - The solicitation is active and open for responses until 4:30 PM EST on May 5, 2026. - All contractual documents are considered issued upon electronic transmission or mailing by the government. - The opportunity is classified under NAICS 332722 and PSC 5306, aligning with contractors specializing in the manufacture of bolts and related fasteners for defense applications. - The contract invokes special control procedures for Critical Safety Items (CSI), requiring rigorous documentation, inspection, and government oversight throughout the contract lifecycle. - Contractors must be prepared for government source inspection at their facilities and, if applicable, at subcontractor locations. **Conclusion** This procurement represents a highly controlled and technically demanding opportunity for manufacturers with proven capabilities in precision fastener production, robust quality systems, and experience with defense-related configuration and certification requirements. Contractors must demonstrate the ability to meet all technical, quality, and documentation standards, and maintain strict traceability and configuration control throughout the production process. Interested parties should carefully review all referenced specifications and ensure their systems and processes are fully compliant prior to submission. For further details and to access the solicitation, visit the official SAM.gov opportunity page: [https://sam.gov/opp/76353f94247849849f66193d93704859/view](https://sam.gov/opp/76353f94247849849f66193d93704859/view).