16--ROD,PISTON

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010424QFF09

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Classification Code

1650

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation (Procurement Identifier: N0010424QFF09) for the supply of a "Rod, Piston" (Outboard), classified under Product Service Code 1650 (Aircraft Hydraulic, Vacuum, and De-icing System Components) and NAICS Code 336413 (Other Aircraft Parts and Auxiliary Equipment Manufacturing). This procurement is critical to the integrity and safety of shipboard systems, with the supplied material designated as SPECIAL EMPHASIS material due to its potential impact on personnel safety and ship survivability. **Purpose and Scope** The primary objective of this solicitation is to procure rods and pistons for use in crucial shipboard systems. The contract requires strict adherence to NAVORD drawing 3224096 and associated specifications, with special control procedures invoked to ensure the receipt of correct, defect-free material. The use of incorrect or defective material could result in catastrophic failure, serious injury, or loss of shipboard systems, underscoring the critical nature of this procurement. **Key Requirements and Deliverables** - **Material and Manufacturing:** The rod, piston must be manufactured from QQ-N-286, Form 2, hot finished and age hardened material. Welding is expressly prohibited on QQ-N-286 material. - **Testing and Certification:** Quantitative chemical and mechanical analysis is required, along with certifications for age hardening and ultrasonic inspection. Slow strain rate tensile tests must be performed by approved laboratories listed in the solicitation. - **Thread and Surface Inspection:** All threads must be inspected per FED-STD-H28 or ASME B1 series standards. O-ring grooves and sealing surfaces must be inspected according to contractually invoked drawings or specifications, with repairs subject to approval if they exceed specified limits. - **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - **Traceability and Compliance:** Material traceability from raw material to finished component is mandatory, with unique traceability markings required. Certificates of compliance must be submitted, showing traceability to individual item markings and confirming full compliance with all specifications and requirements. - **Quality Assurance:** Contractors must maintain a quality system in accordance with ISO-9001, ISO-10012, ANSI-Z540.3, and ISO-17025, or MIL-I-45208 with MIL-STD-45662 calibration requirements. Government Quality Assurance at source is required, and facilities must be available for audit. - **Inspection and Acceptance:** Receiving inspection, discrepancy reporting, and final inspection procedures are detailed, including sampling plans and 100% inspection of material verification and traceability. No material may be shipped prior to receipt of government acceptance. - **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and contract schedule requirements. - **Mercury-Free Requirement:** Mercury and mercury-containing compounds must not be present or come into contact with supplied hardware. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), a federal office under the Department of Defense, Department of the Navy. - **Primary Contact:** Scott R. Youngblood, Telephone: 717-605-2379, Email: [email protected] - **Location:** Mechanicsburg, PA - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/24e2ec97843c44e2b44172e2b872be2f/view) **Procurement Type and Special Considerations** - **Competition:** The procurement is full and open competition; the small business set-aside has been dissolved. - **DPAS Rating:** Any contract awarded will be a "DO" rated order, certified for national defense use under the Defense Priorities and Allocations System (DPAS). - **Past Performance:** NAVSUP WSS will consider past performance in the evaluation of offers, in accordance with FAR 13.106(a)(2) and DFARS 252.213-7000. - **Drawings Access:** If drawings are included, access must be requested via the solicitation page on SAM.gov, followed by email notification to the primary POC. - **Wide Area Workflow (WAWF):** Certification data must be submitted via WAWF for review and acceptance prior to each shipment. No material is to be shipped before acceptance. **Constant Elements Throughout Contract Lifecycle** - The technical and quality requirements, traceability, configuration control, and compliance procedures will remain constant throughout the contract lifecycle. - Government inspection, audit, and acceptance processes, as well as the requirement for certificates of compliance and material traceability, are integral and ongoing. - The prohibition of mercury, adherence to specified packaging standards, and the use of approved laboratories for testing are enduring requirements. **Summary for Contractors** This solicitation represents a highly specialized and safety-critical procurement for the U.S. Navy, requiring rigorous quality assurance, traceability, and compliance with detailed technical specifications. Contractors must demonstrate robust quality systems, experience with critical safety items, and the ability to manage configuration control and traceability throughout the manufacturing process. The opportunity is open to all qualified suppliers, with government inspection and acceptance as a central feature. Interested parties should review the full solicitation and ensure their capabilities align with the stringent requirements outlined. For further information or to request access to technical drawings, contact Scott R. Youngblood at 717-605-2379 or [email protected].