BAR,METAL
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFA07
NAICS
331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding
Classification Code
9530
Additional Details
This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech), seeks qualified small business contractors to supply a specialized metal bar for use in a critical shipboard system. The procurement is identified under Solicitation Number N0010426QFA07 and is classified under NAICS Code 331491 (Nonferrous Metal [except Copper and Aluminum] Rolling, Drawing, and Extruding), with Product Service Code 9530 (Bars and Rods, Nonferrous Base Metal).
**Purpose and Scope**
The primary objective of this procurement is to acquire 70 units of a copper-nickel alloy bar (Alloy C71500, 3-inch round, H01 temper) that will be integrated into a vital shipboard system. The material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), reflecting its criticality: any failure or defect could result in catastrophic consequences, including serious injury, loss of life, or loss of the ship. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest standards of material integrity and performance.
**Key Requirements and Deliverables**
- **Material Specifications:** The bars must conform to MIL-C-15726, with additional requirements and tolerances as specified in AMS-2221. The form is rod, with a diameter of 3 inches, and lengths ranging from 8 to 12 feet (for under 5" diameter) or 5 to 12 feet (for 5" diameter and over), with a ±10% tolerance.
- **Testing and Inspection:** Ultrasonic inspection is mandatory for each bar, performed in accordance with T9074-AS-GIB-010/271 and MIL-C-15726. Liquid penetrant inspection and alloy identity tests are not required. All mechanical properties must meet MIL-C-15726, Table III.
- **Certification and Traceability:** Contractors must provide comprehensive certification data, including test results, traceability markings, and a certificate of compliance. All material must be traceable from the raw stock to the finished product, with permanent and temporary markings as per MIL-STD-792 and other referenced standards.
- **Quality Assurance:** A robust quality system is required, compliant with ISO-9001 (or MIL-I-45208 as an alternate), and calibration systems per ISO-10012, ANSI-Z540.3, or ISO-17025. The contractor’s quality system and procedures are subject to government review and audit.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and any additional contract requirements.
- **Documentation:** Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, via the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance is received.
- **Variation in Quantity:** A variation of -5% of the total contract quantity is permitted.
- **Delivery:** The required delivery is within 365 days, with early and incremental deliveries accepted at no additional cost. Contractors are encouraged to quote actual delivery days.
- **Warranty:** A warranty of 365 days after acceptance of material is required.
**Contracting Entity and Contact Information**
- **Agency:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech)
- **Contact:** Amanda L. Bailey
- **Phone:** 717-605-3354
- **Email:** [email protected]
**Procurement Type and Set-Aside**
This is a fixed-price solicitation and is a total small business set-aside, in accordance with the applicable FAR clauses. The procurement is being conducted under Emergency Acquisition Flexibilities, which may impact certain procedural requirements.
**Special Considerations**
- **Critical Safety Item (CSI):** The item is classified as a Critical Safety Item, requiring rigorous control over all processes, traceability, and documentation.
- **Configuration Control:** Contractors must maintain configuration control and submit Engineering Change Proposals (ECPs) for any changes affecting form, fit, function, or interface.
- **Subcontractor Management:** The prime contractor is responsible for ensuring all sub-tier suppliers meet the same quality and traceability requirements, with periodic audits and documented supplier evaluations.
- **Government Inspection:** Inspection and acceptance will occur at the destination. There is no government source inspection required.
- **Data Submission:** The Electronic Contractor Data Submission (ECDS) system is available for data submissions, waiver requests, and clarifications.
**Constant Elements Over Contract Lifecycle**
Throughout the contract, the following elements will remain constant:
- The requirement for strict adherence to material, testing, and certification standards.
- The necessity for comprehensive traceability and documentation.
- The obligation to maintain and demonstrate a compliant quality system.
- The criticality of the supplied material to shipboard safety and mission assurance.
- The need for timely and accurate submission of all required data and certifications prior to shipment.
**Summary for Contractors**
This opportunity is best suited for small businesses with proven experience in producing high-integrity, nonferrous metal bars for defense or similarly regulated industries. Contractors must have robust quality assurance systems, the ability to perform and document specialized testing, and the infrastructure to ensure full traceability and compliance with all contract requirements. The critical nature of the end use demands a high level of process control, documentation, and responsiveness to government oversight.
Interested parties should review the full solicitation and referenced specifications to ensure capability alignment and compliance readiness. For further information or to submit questions, contact Amanda L. Bailey at the details provided above.
The solicitation is posted on SAM.gov under Opportunity ID 5b7ec20d4d444c3fae5b0fec8d5bcd68, with responses due by November 3, 2025.