ELBOW,PIPE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010425QFF19

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4730

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (N0010425QFF19) for the manufacture and delivery of a specialized pipe fitting, specifically a 2-inch, 90-degree long radius elbow, intended for use in critical shipboard systems. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4730, and is a Total Small Business Set-Aside, inviting participation exclusively from qualified small business concerns. **Purpose and Scope** The elbow fitting to be procured is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting its application in vital shipboard systems where material failure could result in catastrophic consequences, including serious personnel injury, loss of life, or loss of the ship. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest standards of safety and reliability. **Key Requirements and Deliverables** - **Material and Design:** The elbow must be manufactured in accordance with MIL-F-24202, using seamless or welded 70/30 copper-nickel alloy, rated for 700 PSI and 200°F. The starting material must comply with MIL-C-15726, MIL-C-24679, or MIL-T-16420, and must be supplied in the seamless condition. - **First Article Testing (FAT):** The solicitation requires First Article Approval through contractor testing, with one sample unit subjected to destructive testing per MIL-DTL-24202. The FAT report is due 180 days after approval of the purchase request, with government approval required within 60 days of receipt. Production drawings and a dimensional history must accompany the FAT report. - **Certifications and Traceability:** Comprehensive certification data, including chemical and mechanical test reports, must be submitted and approved prior to each shipment. All materials must be fully traceable from raw stock to finished product, with permanent markings and corresponding documentation. Certifications must be positive, unqualified, and reference all applicable standards and acceptance criteria. - **Quality Assurance:** The contractor must maintain a quality system compliant with ISO 9001 (or MIL-I-45208), with calibration systems per ISO 10012 or ANSI-Z540.3/ISO-17025. Government Quality Assurance (GQA) at source is required, and the contractor’s quality system is subject to government review and audit throughout the contract lifecycle. - **Inspection and Acceptance:** All items are subject to rigorous inspection, including visual, dimensional, and non-destructive testing (NDT) as specified. Lot acceptance is based on zero defects, and any nonconformance must be reported and dispositioned according to contract procedures. - **Welding and Brazing:** If required, all welding and brazing must comply with NAVSEA and MIL standards, with procedures and personnel qualifications submitted for approval prior to production. Filler metals must be certified, and all welds must be traceable and documented. - **Packaging and Delivery:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements. Final delivery of material is required within 365 days of contract award, with no shipment permitted prior to government acceptance. **Contract Administration and Special Considerations** - **Contracting Entity:** NAVSUP Weapon Systems Support Mechanicsburg, a federal office under the Department of the Navy, is the contracting authority. The primary point of contact is Christian M. Valdez (717-605-3229, [email protected]). - **Place of Performance and Delivery:** Certification data and deliverables are to be submitted to Portsmouth Naval Shipyard (DODAAC N50286), with inspection and acceptance by N39040. - **Defense Priorities and Allocations System (DPAS):** Any contract awarded will be a DO-rated order, certified for national defense use, and subject to emergency acquisition flexibilities. - **Evaluation Criteria:** Past performance will be considered in the evaluation of offers, in accordance with FAR and DFARS provisions. - **Data Submission:** All certification and test data must be submitted via the Wide Area Workflow (WAWF) system, with email notifications to designated Navy contacts. No material may be shipped prior to receipt of formal acceptance. **Applicable Standards and Documentation** The contract invokes a comprehensive set of military and industry standards, including but not limited to MIL-F-24202, MIL-T-16420, MIL-STD-2035, MIL-STD-792, ISO 9001, ISO 10012, and NAVSEA welding and brazing standards. Contractors are responsible for obtaining and adhering to all referenced documents and for maintaining configuration control throughout the contract. **Summary for Contractors** This opportunity is suited for small businesses with demonstrated expertise in the manufacture of high-reliability, critical shipboard pipe fittings, and with robust quality assurance, traceability, and certification systems. The contract’s requirements for first article testing, comprehensive documentation, and strict adherence to military and industry standards reflect the critical nature of the end-use application. Contractors must be prepared for detailed government oversight, including source inspection and configuration control, and must ensure all deliverables meet the Navy’s rigorous standards for safety, reliability, and traceability. Interested parties should review the full solicitation and associated specifications, and direct any questions to the contracting officer. The solicitation is active and available for response through the official SAM.gov portal. **Contact Information:** - Contracting Office: NAVSUP Weapon Systems Support Mechanicsburg - Primary Contact: Christian M. Valdez - Phone: 717-605-3229 - Email: [email protected] - Notice URL: [https://sam.gov/opp/756c7f94d4e94969a37c355b32556813/view](https://sam.gov/opp/756c7f94d4e94969a37c355b32556813/view)