SCREW,CAP,HEX HD
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010425QZE05
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5305
Additional Details
The Naval Supply Systems Command (NAVSUP) Weapon Systems Support, Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010425QZE05) for the supply of a specialized hex head cap screw, classified under Product Service Code 5305 and NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing). This procurement is designated as a total small business set-aside, providing an opportunity for qualified small businesses to participate in supporting critical shipboard systems for the U.S. Navy.
**Purpose and Scope**
The primary objective of this solicitation is to procure hex head cap screws for use in crucial shipboard systems. The material specified is considered "SPECIAL EMPHASIS" (Level I, Scope of Certification, or Quality Assured), reflecting its criticality to personnel safety, ship integrity, and mission assurance. The failure or malfunction of these components could result in serious injury, loss of life, or catastrophic damage to vital shipboard systems, underscoring the stringent quality and traceability requirements imposed throughout the contract lifecycle.
**Key Requirements and Deliverables**
Contractors are required to manufacture the hex head cap screw in strict accordance with Oceaneering drawing FC11001 Item 99 and CSD481, as well as all referenced specifications and standards. The material must be ASTM-B446, Grade 1, UNS N06625, conforming to MIL-DTL-1222, Type I, and specific drawing notes. Comprehensive certification is required for chemical and mechanical properties, including quantitative analysis traceable to heat identification.
Testing and certification requirements include:
- Liquid penetrant inspection for each screw, performed per T9074-AS-GIB-010/271 and sampled per MIL-DTL-1222.
- Wedge tensile tests on full-size fasteners from each production lot, with detailed procedures based on fastener type and diameter, referencing ASTM-F606 and MIL-DTL-1222.
- 100% inspection for traceability marking, completeness, and legibility of certification test reports.
- Final inspection for form, fit, and function, with lot acceptance based on zero defects.
Traceability is paramount; each screw must be permanently marked with a traceability code, material symbol, manufacturer’s identification, and, for self-locking screws, six distinct dots. Markings must comply with MIL-STD-792 and MIL-DTL-1222, ensuring visibility and durability through all manufacturing and assembly processes.
Contractors must submit a Certificate of Compliance (Special Emphasis C of C) with each shipment, demonstrating full traceability to the marking on each item and attesting to compliance with all specifications and requirements. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before formal acceptance.
**Quality Assurance and Configuration Control**
A robust quality system is required, conforming to ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012, ANSI-Z540.3, and ISO-17025. The contractor’s quality system and procedures are subject to government review, audit, and approval prior to production and throughout the contract. Government Quality Assurance will be performed at the source, and any changes to the quality system require government concurrence.
Configuration control is strictly maintained by the government. Any waivers, deviations, or engineering changes must be submitted for approval, with detailed documentation of the nature, impact, and corrective actions. The contractor is responsible for maintaining the equipment baseline and providing updated configuration documentation as required.
**Packaging and Delivery**
Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and contract schedule requirements. Delivery schedules stipulate submission of certification data 20 days prior to delivery, with review and acceptance by Portsmouth Naval Shipyard within 18 working days, and final material delivery within 186 days.
**Contracting Entity and Contact Information**
- Contracting Entity: NAVSUP Weapon Systems Support, Mechanicsburg (Federal Office)
- Organization Key: 500021097
- Primary Contact: Ashton K. Perry, 717-605-7574, [email protected]
- Notice URL: [SAM.gov Opportunity](https://sam.gov/opp/1b777218dc214980a95f26a51480b684/view)
- Response Deadline: January 8, 2026, 21:01
**Special Considerations**
- The contract is DO certified under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense, emergency preparedness, and energy program use.
- Emergency Acquisition Flexibilities (EAF) apply per 41 U.S.C. 1903.
- Drawings are available on SAM.gov with restricted access; vendors must request access and notify the listed POC.
- All contractual documents are considered issued upon electronic transmission, and bilateral agreement is established upon government acceptance of the contractor’s proposal.
**Summary for Contractors**
This opportunity is suited for small businesses with proven capabilities in manufacturing high-reliability fasteners for defense applications, particularly those with established quality systems, experience in traceability and certification, and the ability to comply with rigorous government inspection and configuration control requirements. The contract’s focus on safety-critical shipboard systems, comprehensive testing, and documentation, as well as strict adherence to military and industry standards, will remain constant throughout the contract lifecycle. Interested contractors should carefully review all technical and quality requirements, ensure access to referenced documents and drawings, and be prepared for detailed government oversight and data submission protocols.