53--NUT,SELF-LOCKING,HE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010425QZB74

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5310

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Naval Supply Systems Command (NAVSUP) Weapon Systems Support, Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010425QZB74) for the supply of self-locking nuts, specifically identified as "NUT, SELF-LOCKING, HE" with part number MS17828-24C. This procurement is classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5310, indicating its focus on the manufacturing and supply of fasteners for critical shipboard applications. **Purpose and Scope** The primary objective of this procurement is to acquire self-locking nuts for use in crucial shipboard systems. These components are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) due to their criticality; failure or nonconformance could result in serious personnel injury, loss of life, or catastrophic failure of shipboard systems. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest level of reliability and safety. **Key Requirements and Deliverables** Contractors are required to manufacture and deliver self-locking nuts in accordance with NASM25027, with additional requirements and modifications as specified in the solicitation. The nuts must be produced from material conforming to QQ-N-281 (class A annealed or class B cold drawn), with all material in a lot being from the same class. The self-locking element must comply with ASTM-D4066, Group 01, Class 1 or 2, Grade 1. Deliverables include: - The specified quantity of self-locking nuts, with one additional fastener per uniquely identified heat/lot for traceability. - Complete traceability and certification documentation for each lot, including chemical and mechanical analysis, test certifications (such as dye penetrant inspection and quality conformance tests), and certificates of compliance. - First Article Testing (FAT) documentation, unless previously qualified, as per CDRL DI-NDTI-80809 and Table XIII of NASM25027. - Marking of each fastener for traceability, including manufacturer identification, material symbol, and heat/lot code, in accordance with NASM 17828 and MIL-STD-792. - Preservation, packaging, and marking in accordance with MIL-STD-2073 and contract requirements. **Quality Assurance and Control** The contract mandates a robust quality system, preferably ISO 9001 (with calibration per ISO 10012 or ANSI-Z540.3/ISO-17025), or MIL-I-45208 with MIL-STD-45662 as an acceptable alternative. The contractor’s quality system and products are subject to government evaluation, verification, and source inspection by the Defense Contract Management Agency (DCMA) or other authorized representatives. All inspection and test records must be maintained and traceable to the material inspected. Subcontractor quality assurance is also emphasized, requiring the prime contractor to assess, audit, and ensure compliance of all sub-tier suppliers. **Traceability and Certification** Traceability from raw material to finished product is a core requirement. Each lot must be uniquely identified, and all certification data must be directly linked to the traceability marking on the material. Certification reports must be positive, unqualified, and signed by authorized personnel. Any process altering material properties requires re-certification and re-identification. **Packaging and Delivery** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific instructions. Delivery is FOB Destination, with all certification data submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment. No material may be shipped before receipt of acceptance. **Contracting Entity and Contact Information** - Contracting Entity: NAVSUP Weapon Systems Support, Mechanicsburg (NAVSUP WSS MECH) - Entity Type: Federal Office - Primary Contact: Mackara Chhen, Telephone: 717-605-3517, Email: [email protected] **Procurement Type and Set-Aside** This solicitation is a total small business set-aside, restricting competition to qualified small business concerns under NAICS 332722. The procurement is a fixed-price supply contract, with bilateral award requiring written contractor acceptance. The requirement is DO certified under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense and emergency preparedness. **Special Considerations** - Emergency Acquisition Flexibilities (EAF) apply. - Past performance will be considered in accordance with FAR 13.106(a)(2). - Access to drawings, if required, must be requested via SAM.gov and coordinated with the listed POC. - All waivers, deviations, and engineering changes require government approval and must be processed through the Electronic Contractor Data Submission (ECDS) system. - Mercury and mercury-containing compounds are strictly prohibited. - The contract includes requirements for government source inspection, configuration control, and comprehensive discrepancy reporting. **Summary for Contractors** This opportunity is suited for small businesses with demonstrated expertise in the manufacture of high-reliability, traceable fasteners for defense applications, and with robust quality assurance systems in place. The contract’s technical and administrative requirements are extensive, reflecting the critical nature of the end-use application. Contractors must be prepared to provide detailed certification, maintain strict traceability, and comply with all government inspection and acceptance protocols. The solicitation is inactive as of the notice date, but the requirements outlined herein provide a comprehensive overview for potential future opportunities of a similar nature. For further information or to review the solicitation, contractors may refer to the official posting at [SAM.gov Opportunity ID 1b2c1a4d61934f9f938bf45bdc3d23d8](https://sam.gov/opp/1b2c1a4d61934f9f938bf45bdc3d23d8/view).