53--CAP,SCREW SOCKET HD

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010424QZC52

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5305

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation (Procurement Identifier: N0010424QZC52) for the supply of socket head cap screws, classified under Product Service Code 5305 and NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing). This procurement is a total small business set-aside, offering an opportunity for qualified small businesses specializing in high-precision fastener manufacturing to support critical shipboard systems. **Purpose and Scope** The primary objective of this solicitation is to procure socket head cap screws that will be used in crucial shipboard systems. The nature of these systems is such that the use of incorrect or defective material could result in catastrophic failure, including serious personnel injury, loss of life, or loss of vital shipboard systems. As a result, the procured items are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures to ensure the highest level of reliability and traceability. **Key Requirements and Deliverables** Contractors are required to manufacture and deliver socket head cap screws conforming to MIL-DTL-1222, with specific requirements for material grade (500, QQ-N-286), condition (solution annealed and age hardened), size (5/16 inch diameter, 1 5/8 inch length), thread series (18 UNRC), and class of fit (3A). The end configuration must be chamfered, and threads may be cut or ground as permitted. All fasteners must be marked for traceability in accordance with MIL-STD-792 and MIL-DTL-1222, including the material symbol, manufacturer’s identification, and unique traceability marking. The contract requires comprehensive certification and traceability for all supplied items. This includes: - Submission of certification data (CDRLs) at least 20 days prior to scheduled delivery, with review and acceptance by Portsmouth Naval Shipyard (PNSY) within 6 working days. - Final delivery of material within 200 days after contract award. - Provision of one additional fastener per heat/lot for testing and traceability. - Complete traceability from raw material to finished product, with all certification data referencing the unique traceability marking on each item. - Certifications for chemical, mechanical, and non-destructive testing, including liquid penetrant and ultrasonic inspections as specified. - Compliance with mercury-free requirements. - Adherence to preservation, packaging, and marking requirements per MIL-STD-2073. **Quality Assurance and Testing** The contract mandates a robust quality system, preferably ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Government Quality Assurance (GQA) at source is required, and the contractor’s quality system and procedures are subject to government review and approval prior to production and throughout the contract lifecycle. Production lot testing (PLT) is required, and specific laboratories are designated for slow strain rate tensile testing of QQ-N-286 material. Wedge tensile tests and other mechanical property verifications must be performed on full-size fasteners, with detailed reporting and certification. All certification documentation must be submitted via Wide Area Workflow (WAWF) and accepted by the government prior to shipment. No material may be shipped before formal acceptance. **Contract Administration and Special Considerations** - The resultant award will be issued bilaterally, requiring written contractor acceptance. - The contract is DO-rated under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense. - Any waivers, deviations, or engineering change proposals must be submitted for government approval, with detailed justification and impact analysis. - Subcontractor quality assurance and traceability requirements are strictly enforced, with the prime contractor responsible for flow-down and verification. - The contract includes Equal Opportunity and Buy American/Free Trade Agreements compliance clauses. **Contracting Entity and Contact Information** - Contracting Entity: NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS) - Department: Department of Defense, Department of the Navy - Primary Contact: Lydia M. Shaloka, Telephone: 215-697-4717, Email: [email protected] - Alternate POC: Karen A. Palm, Telephone: 717-605-4066, Email: [email protected] - Notice URL: [https://sam.gov/opp/d0cea5a68c484c349f0002af39f50960/view](https://sam.gov/opp/d0cea5a68c484c349f0002af39f50960/view) **Procurement Timeline** - Notice Post Date: 06/05/2026 - Response Due Date: 12/05/2026 **Summary for Contractors** This solicitation represents a highly controlled, technically demanding procurement for socket head cap screws intended for critical Navy shipboard applications. Contractors must demonstrate robust quality management, traceability, and compliance with all technical and certification requirements. The opportunity is restricted to small businesses under NAICS 332722, and the contract will be administered with high visibility and priority due to its national defense implications. Interested contractors should carefully review all referenced specifications and ensure their capability to meet the rigorous standards and documentation requirements outlined in the solicitation. For further details, contractors are encouraged to review the full solicitation and associated attachments on SAM.gov and direct any technical or administrative questions to the listed contracting officers.