SCREW,CAP,HEXAGON H

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010425QFE62

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5305

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech), has issued a solicitation (N0010425QFE62) for the manufacture and supply of a specialized Screw, Cap, Hexagon Head. This procurement is classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5305, and is designated as a total small business set-aside, inviting qualified small business manufacturers to participate. **Purpose and Scope** The material solicited is intended for use in a crucial shipboard system, where the integrity and reliability of the supplied fasteners are paramount. The failure or use of incorrect/defective material could result in catastrophic outcomes, including serious personnel injury, loss of life, or loss of vital shipboard systems. As such, the item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control procedures to ensure the correct material is received and installed. **Key Requirements and Objectives** - **Manufacturing Specifications:** The screw must conform to MIL-DTL-1222, with specific requirements for material grade (500, QQ-N-286), condition (solution annealed and age hardened), size (1 1/2 inches diameter, 5 inches length), thread series (6 UNC, class 2A), and end configuration (chamfered). Drilling holes in the head is required as per drawing 4675682. - **Testing and Certification:** First Article Testing (FAT) is required, including destructive government testing. FAT samples are not to be delivered against contract quantity. Certifications for ultrasonic inspection, liquid penetrant inspection, annealing, and age hardening are required, with traceability maintained for each heat/lot. Mechanical properties must be determined post-heat treatment, and wedge tensile tests must be conducted on full-size fasteners for each production lot. - **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The quality system and products are subject to government evaluation, verification, and inspection. Government Quality Assurance will be performed at the source, and any changes to the quality system require government concurrence. - **Traceability and Compliance:** Complete traceability from material to certification test reports and other Objective Quality Evidence (OQE) is mandatory. Material certification reports must accurately reflect compliance with all specified requirements, and material marking for traceability must be permanently applied per MIL-STD-792 and MIL-DTL-1222. - **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. All waivers and deviations require contracting officer approval. - **Packaging and Delivery:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. Early and incremental deliveries are acceptable at no additional cost. The proposed delivery schedule is 365 days, with certification data submitted 20 days prior to delivery for review and acceptance by Portsmouth Naval Shipyard. No material may be shipped prior to acceptance. **Special Considerations** - **Critical Safety Item (CSI):** The item is classified as a Critical Safety Item, meaning its failure could cause catastrophic or critical failure of ship systems or pose unacceptable risk to personnel. - **DPAS Priority Rating:** Any contract awarded will be a 'DX' rated order, certified for national defense use under the Defense Priorities and Allocations System (DPAS). - **Emergency Acquisition Flexibilities:** The procurement is issued under emergency acquisition flexibilities, reflecting the urgency and criticality of the requirement. - **Past Performance Evaluation:** NAVSUP WSS Mech will consider past performance in the evaluation of offers, in accordance with FAR 13.106(a)(2) and DFARS 252.213-7000. - **Government Source Inspection:** Inspection and acceptance will be performed by designated government representatives, with certification documentation submitted via Wide Area Work Flow (WAWF). **Contracting Entity and Contact Information** - **Contracting Entity:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech), Department of the Navy, Department of Defense. - **Primary Contact:** Lydia M. Shaloka, Telephone: 215-697-4717, Email: [email protected] - **Additional Contact:** Francine A. Pommells, Telephone: 564-230-3066, Email: [email protected] - **Location:** Mechanicsburg, PA - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/760cfecd45ac4b1fbf90134efbcf0f03/view) **Constant Elements Throughout Contract Lifecycle** - The requirement for strict adherence to technical specifications, quality assurance, traceability, and certification will remain constant. - The item’s designation as SPECIAL EMPHASIS material and Critical Safety Item will continue to drive rigorous control and compliance procedures. - Government oversight, including source inspection, configuration control, and acceptance protocols, will be maintained. - The contract will be governed by DPAS priority and emergency acquisition flexibilities, reflecting its national defense importance. **Summary for Contractors** This solicitation represents a highly specialized and critical requirement for the U.S. Navy, demanding exceptional manufacturing precision, robust quality assurance, and comprehensive traceability. Contractors must demonstrate capability to meet stringent technical, testing, and certification standards, maintain a compliant quality system, and support configuration and traceability controls. The opportunity is well-suited for small businesses with proven experience in manufacturing high-integrity fasteners for defense applications, particularly those familiar with Level I/SUBSAFE material requirements and government quality assurance protocols. Interested parties should review the full solicitation and associated specifications, and direct any inquiries to the designated NAVSUP WSS Mech contacts. Response deadline is April 3, 2026.