53--NUT,SLEEVE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010421QFD38
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5310
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech), has issued a solicitation for the procurement of a specialized item: Nut, Sleeve (Product Service Code 5310), under NAICS 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing). This procurement is classified as a federal opportunity and is currently active, with a response deadline of June 25, 2026. Interested parties can access the solicitation via SAM.gov at https://sam.gov/opp/28e6a24c99e94ee1859cd0ce7990f605/view.
**Purpose and Scope**
The primary purpose of this procurement is to supply nuts (specifically, Nut, Covered, per General Electric Parts List PL-00781E733 part number 16 and drawing 6643225 piece number 17) for use in critical shipboard systems. These components are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting their essential role in ensuring the safety and operational integrity of naval vessels. The use of incorrect or defective material could result in catastrophic failure, serious injury, loss of life, or loss of vital shipboard systems, underscoring the stringent requirements and controls imposed throughout the contract lifecycle.
**Key Requirements and Objectives**
Contractors must adhere to a comprehensive set of technical, quality, and certification requirements, including:
- **Material and Manufacturing Standards:** The nuts must be manufactured from ASTM-A193, grade B16 material, with complete traceability maintained for each heat/lot. Internal threads must be formed by cutting (cold forming is not permitted), and all threads must be inspected per FED-STD-H28 or ASME B1 series standards.
- **Testing and Certification:** Required tests include Liquid Penetrant or Magnetic Particle Inspection (Wet Method), Proof Load Test, and other tests as specified in MIL-DTL-1222. Certifications for these tests must be submitted, and sampling must follow MIL-DTL-1222.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Government Quality Assurance at source is required, and facilities must be available for audit.
- **Traceability and Compliance:** All material must be traceable to certification test reports, with permanent marking per MIL-STD-792 and MIL-DTL-1222. Certificates of compliance must be submitted, showing traceability to each item and confirming full compliance with all specifications and requirements.
- **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- **Welding/Brazing:** If required, welding and brazing must be performed by qualified personnel and procedures per S9074-AR-GIB-010A/278 and S9074-AQ-GIB-010/248, with prior approval and submission of qualification data.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements.
- **Government Furnished Material/Equipment:** If provided, contractors must implement documented control procedures for receipt, inspection, storage, and functional testing.
**Deliverables and Schedule**
- Submission of certification data (CDRLs) is required at least 20 days prior to scheduled delivery.
- Portsmouth Naval Shipyard (PNSY) will review and accept certification data within 6 working days of receipt.
- Final delivery of material must occur within 365 days after the effective date of the contract.
- Early delivery is acceptable at no additional cost to the government.
- All certification documentation must be submitted via Wide Area Work Flow (WAWF), with specific instructions for shipment, inspection, and acceptance.
**Evaluation Criteria**
- Delivery schedule and past performance will be key evaluation factors.
- Early delivery is encouraged.
- The contract will be DX rated under the Defense Priorities and Allocations System (DPAS), indicating national defense priority.
**Contracting Entity and Contact Information**
- Contracting Entity: NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech)
- Department: Department of Defense, Department of the Navy
- Primary Contact: Jordan D. Neely ([email protected])
- Additional Contact: Francine A. Pommells ([email protected])
- Office Location: Mechanicsburg, PA
**Special Considerations**
- The solicitation is subject to Buy American, Free Trade Agreements, and Balance of Payments Program requirements.
- Security prohibitions and exclusions apply per current class deviations.
- The contract is for a Critical Safety Item (CSI), requiring rigorous quality and traceability controls.
- All waivers and deviations must be submitted and approved via the Electronic Contractor Data Submission (ECDS) system.
- No material may be shipped prior to receipt of government acceptance.
**Constant Elements Throughout Contract Lifecycle**
- The requirement for traceability, certification, and compliance with technical specifications and quality standards will remain constant.
- Government source inspection and quality assurance at source will be maintained.
- Configuration control and the process for submitting ECPs, waivers, and deviations will persist.
- The contract’s DX rating and associated national defense priority will be upheld.
**Summary for Contractors**
This opportunity is highly specialized and demands strict adherence to technical, quality, and certification requirements. Contractors with proven experience in manufacturing critical fasteners for defense applications, robust quality systems, and the ability to manage traceability and compliance documentation will find this solicitation aligned with their capabilities. The contract’s focus on safety, traceability, and configuration control reflects the Navy’s commitment to operational integrity and personnel safety. Interested parties should review the full solicitation and ensure their systems and processes meet the outlined requirements before submitting a response.
For further information or clarification, contractors are encouraged to contact the primary contracting officer at [email protected].