61--DS POWER CABLE ASSY

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010425QFD39

NAICS

335311 - Power, Distribution, and Specialty Transformer Manufacturing

Classification Code

6150

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Naval Supply Systems Command (NAVSUP) Weapon Systems Support, Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010425QFD39) for the manufacture and delivery of a DS Power Cable Assembly (DS POWER CABLE ASSY), classified under Product Service Code 6150 and NAICS Code 335311 (Power, Distribution, and Specialty Transformer Manufacturing). This procurement is a total small business set-aside, reflecting the Navy’s commitment to supporting small business participation in critical defense supply chains. **Purpose and Scope** The DS Power Cable Assembly is a critical component intended for use in vital shipboard systems. The assembly’s performance and reliability are paramount, as failure or nonconformance could result in severe consequences, including personnel injury, loss of life, or catastrophic failure of shipboard systems. As such, the item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures to ensure the delivery of conforming, high-reliability material. **Key Requirements and Deliverables** Contractors are required to manufacture the DS Power Cable Assembly in strict accordance with NAVSEA Drawing 5486641, Part Number 5486641-030, with specific modifications and amplifications detailed in the solicitation. The assembly must meet precise length tolerances (90 FT +2%/-0%) and incorporate non-metallic materials that satisfy the toxicity and flammability requirements of NAVSEA SS800-AG-MAN-010/P-9290. Any deviation from specified materials requires special engineering approval and may necessitate additional testing. Critical manufacturing steps, such as the application of a Non-Conductive Coating (NCC) plasma spray to connector plug bodies and the wiring and molding of the assembly, must be performed by vendors approved and listed in the Electronic Contractor Data Submission (ECDS) system. The contractor must identify any approved vendor used (other than the prime manufacturer) on the Special Emphasis Certificate of Compliance (C of C). Each cable assembly is subject to rigorous quality conformance tests per MIL-DTL-24231 Type 1, with additional requirements for hydrostatic pressure, insulation resistance, and dielectric testing as specified in the solicitation. A First Article Test (FAT) is required, involving destructive testing of one complete cable assembly to verify compliance with all technical requirements before proceeding with full production. The assembly must include marker tags manufactured per MIL-DTL-15024 and self-clinching adjustable strap ties per SAE AS 23190, with detailed requirements for engraving, tag dimensions, and placement. Four additional label plate tags must be provided with each cable, as specified in the technical documentation. **Quality Assurance and Traceability** The contractor must maintain a robust quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems meeting ISO-10012 or ANSI-Z540.3 with ISO-17025. The quality system and all products are subject to government evaluation, verification, and acceptance. Government Quality Assurance (GQA) will be performed at the source, and any changes to the place of performance or the quality system require prior authorization. Traceability is a critical requirement: all materials must be permanently marked and traceable to Objective Quality Evidence (OQE), with records maintained through all process operations, including subcontracted work. The contractor must prepare and submit a comprehensive Certificate of Compliance for each item, certifying full conformance to all contractual requirements and specifications. All inspection and test records must be retained for a minimum of seven years and be available for government review. The government reserves the right to inspect supplies or services at the subcontractor’s facility and requires that all purchasing documents to subcontractors cite applicable quality and product requirements. **Packaging and Delivery** Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and any additional requirements specified in the contract schedule. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before receipt of acceptance. **Contracting Entity and Contact Information** - Contracting Entity: NAVSUP Weapon Systems Support, Mechanicsburg (NAVSUP WSS MECH) - Entity Type: Federal Office - Primary Contact: Noelle M. Smith - Telephone: 717-605-3992 - Email: [email protected] **Procurement Type and Special Considerations** This is a fixed-price solicitation, set aside exclusively for small businesses. The procurement is governed by the Buy American Act, Free Trade Agreements, and Balance of Payments Program, with relevant certifications required. The item is designated as a Critical Safety Item (CSI), and all applicable laws, regulations, and security requirements for handling technical data and documentation apply. **Constant Elements Over Contract Lifecycle** Throughout the contract, the following elements remain constant: - The requirement for strict adherence to technical drawings, specifications, and quality assurance procedures. - The necessity for traceability and comprehensive documentation of all materials and processes. - The obligation to maintain and make available all inspection, test, and compliance records. - The requirement for government source inspection and acceptance prior to shipment. - The need for configuration control and government approval of any waivers, deviations, or engineering changes. **Summary for Contractors** This opportunity is suited for small businesses with demonstrated expertise in manufacturing high-reliability, technically complex cable assemblies for naval or defense applications. Contractors must have robust quality systems, experience with government source inspection, and the ability to manage detailed traceability and compliance documentation. The solicitation’s requirements for approved vendors, first article testing, and strict configuration control underscore the critical nature of the DS Power Cable Assembly to Navy operations. Interested contractors should carefully review all referenced specifications and ensure they can meet the technical, quality, and documentation requirements before submitting an offer. For further information or clarification, contact Noelle M. Smith at the details provided above. For the full solicitation and any updates, refer to the official posting at [SAM.gov Opportunity ID cf249a8a6ded468485676fbcb530e25f](https://sam.gov/opp/cf249a8a6ded468485676fbcb530e25f/view).