NUT,HEAVY,HEXAGON

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010425QFD19

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5310

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (N0010425QFD19) for the supply of a critical shipboard component: the Heavy Hexagon Nut. This procurement is classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5310, and is a Total Small Business Set-Aside, inviting qualified small business manufacturers to participate. **Purpose and Scope** The primary objective of this solicitation is to acquire Heavy Hexagon Nuts for use in crucial shipboard systems. These components are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) due to their critical role in ship safety and operational integrity. The failure or nonconformance of these nuts could result in severe personnel injury, loss of life, or catastrophic failure of vital shipboard systems, including the potential loss of the ship itself. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure only fully compliant material is delivered and installed. **Key Requirements and Deliverables** Contractors are required to manufacture and deliver Heavy Hexagon Nuts conforming to MIL-DTL-1222, with additional specifications and modifications as detailed in the solicitation. Key technical requirements include: - **Material and Design:** Nuts must be of Grade 2H, 4, or 7 (per ASTM-A194), hardened and tempered, 9/16 inch size, 12 UNC thread series, and Class 2B fit. Bearing surfaces must be chamfered or washer faced. - **Coating:** Phosphate coating per MIL-DTL-16232 Type Z, Class 3 is required; zinc plating per ASTM-B633, Type 1, Class 12 is an acceptable alternate. Coating/plating must occur after final machining. - **Testing and Certification:** Each lot must undergo and be certified for Liquid Penetrant or Magnetic Particle Inspection (Wet Method), with sampling per MIL-DTL-1222. Hydrogen embrittlement relief is required for plated/coated fasteners exceeding specified hardness thresholds. - **Traceability:** Complete traceability from raw material to finished product is mandatory, including unique heat/lot numbers marked on each item and corresponding certification data. - **Quality System:** Contractors must maintain a quality system compliant with ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO 10012 or ANSI-Z540.3/ISO-17025. Quality system documentation must be available for government review and approval. - **Inspection and Acceptance:** Government Quality Assurance at source is required. No material may be shipped prior to government acceptance, and all certification data must be submitted via Wide Area Workflow (WAWF) for review and acceptance by Portsmouth Naval Shipyard. - **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements. - **Additional Deliverables:** One extra fastener per uniquely identified heat/lot must be provided for traceability and testing purposes. **Contract Administration and Special Considerations** - **Contract Type:** Fixed-price supply contract. - **Set-Aside:** Total Small Business Set-Aside. - **DPAS Rating:** Any resulting contract will be a "DX" rated order, indicating priority for national defense use under the Defense Priorities and Allocations System (DPAS). - **Emergency Acquisition:** This procurement is issued under Emergency Acquisition Flexibilities (EAF). - **Source Certification:** Level I Joint Source Certification is required. - **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface. - **Waivers/Deviations:** All requests for waivers or deviations must be submitted to and approved by the Contracting Officer. - **Past Performance:** NAVSUP WSS will consider past performance in the evaluation of offers. **Contracting Entity and Contact Information** - **Contracting Entity:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), Department of the Navy, Department of Defense. - **Location:** Mechanicsburg, PA (with delivery and acceptance at Portsmouth Naval Shipyard, DODAAC N50286). - **Primary Contact:** Lydia M. Shaloka, Telephone: 215-697-4717, Email: [email protected] - **Certification Submission:** Certification data must be submitted via WAWF and notification sent to [email protected]. **Response and Timeline** - **Solicitation Status:** Active - **Response Deadline:** April 1, 2026, 20:04 - **Solicitation URL:** [https://sam.gov/opp/5828d74cf857489f95750601a713f262/view](https://sam.gov/opp/5828d74cf857489f95750601a713f262) **Summary for Contractors** This opportunity is suited for small business manufacturers with robust quality assurance systems, experience in high-reliability fastener production, and the ability to meet rigorous traceability and certification requirements. The contract supports critical national defense needs and requires strict adherence to technical, quality, and administrative controls throughout the contract lifecycle. Contractors must be prepared for comprehensive government oversight, configuration management, and timely submission of all required documentation. The scope and requirements will remain consistent throughout the contract, ensuring a stable framework for performance and compliance.