SCREW,CAP,HEXAGON H
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010425QFD41
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5305
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation (N0010425QFD41) for the manufacture and supply of Screw, Cap, Hexagon Head fasteners. This procurement is classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5305, reflecting its focus on critical shipboard hardware. The solicitation is a total small business set-aside, inviting qualified small business manufacturers to participate.
**Purpose and Scope**
The primary purpose of this procurement is to acquire hexagon head cap screws for use in crucial shipboard systems. These fasteners are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), underscoring their criticality to ship safety and operational integrity. The use of incorrect or defective material could result in catastrophic failure, serious injury, loss of life, or loss of vital shipboard systems. As such, the contract invokes stringent control procedures to ensure the correct material is received and installed.
**Key Requirements and Objectives**
Contractors are required to manufacture screws in accordance with Naval Sea drawing 803-5184193, part number 803-5184193-3X-08, with modifications as specified in the solicitation. The material must be ASTM-A193, grade B16, and each uniquely identified heat/lot of material in each shipment must include one additional fastener for traceability purposes.
Certifications are mandatory for chemical and mechanical analysis, as well as for nondestructive testing (Liquid Penetrant or Magnetic Particle Inspection). Thread inspection must comply with FED-STD-H28 series or ASME B1 series as a commercial equivalent. Wedge tensile tests are required for each production lot, with specific testing standards outlined for various fastener types and sizes.
Traceability is a central requirement: all fasteners must be permanently marked with material symbol, manufacturer identification, and traceability marking, in accordance with MIL-DTL-1222 and MIL-STD-792. Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, via the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance is received.
The contractor must maintain a robust quality system, preferably ISO-9001 with calibration per ISO-10012 or ANSI-Z540.3/ISO-17025. MIL-I-45208 with MIL-STD-45662 calibration is acceptable as an alternate. Quality system documentation must be available for government review, and government quality assurance will be performed at the source. Inspection records, traceability documentation, and compliance certificates are required throughout the contract lifecycle.
**Expected Deliverables**
- Hexagon head cap screws manufactured to NAVSEA specifications and drawings
- Complete certification and traceability documentation for each lot and fastener
- Compliance with all material, marking, testing, and quality assurance requirements
- Packaging, preservation, and marking per MIL-STD-2073 and contract schedule
- Timely submission of certification data and compliance certificates via WAWF
- Adherence to configuration control, including submission of Engineering Change Proposals (ECPs) for any modifications
**Contracting Entity and Contact Information**
- Contracting Entity: NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS)
- Department: Department of Defense, Department of the Navy
- Primary Contact: Jordan D. Neely, Telephone: 717-605-8197, Email: [email protected]
- Additional Contact: Francine A. Pommells, Telephone: 564-230-3066, Email: [email protected]
- Notice URL: [SAM.gov Opportunity](https://sam.gov/opp/9bf685989821438fa2ab344e94049500/view)
**Procurement Type and Special Considerations**
This is a fixed-price solicitation, issued under Emergency Acquisition Flexibilities (EAF), and is a "DO" rated order under the Defense Priorities and Allocations System (DPAS), certified for national defense use. The procurement is a total small business set-aside, and past performance will be considered in the evaluation of offers. Access to drawings may require a request via the solicitation page on SAM.gov, followed by email notification to the primary point of contact.
**Constant Elements Throughout Contract Lifecycle**
- Strict adherence to material, testing, marking, and traceability requirements
- Maintenance of a compliant quality system and documentation
- Government source inspection and acceptance prior to shipment
- Submission of certification and compliance data for each shipment
- Configuration control and change management procedures
- Preservation, packaging, and marking per military standards
**Summary for Contractors**
This opportunity is highly specialized and demands rigorous quality assurance, traceability, and compliance with Navy technical standards. Contractors must demonstrate robust manufacturing, testing, and documentation capabilities, as well as experience with critical safety items and government quality assurance processes. The contract is suitable for small businesses with proven expertise in manufacturing high-integrity fasteners for defense applications, and the ability to manage complex certification and traceability requirements.
Interested parties should review the solicitation in detail, ensure access to required drawings and specifications, and prepare to submit comprehensive documentation and certifications as part of their offer and throughout contract performance.