NUT,HEAVY HEXAGON
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010425QFC53
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5310
Additional Details
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (N0010425QFC53) for the procurement of "Nut, Heavy Hexagon" components. This procurement is classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5310, and is a Total Small Business Set-Aside, inviting offers exclusively from qualified small business concerns.
**Purpose and Scope**
The primary objective of this solicitation is to acquire heavy hexagon nuts for use in critical shipboard systems. These components are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) due to their application in systems where failure could result in severe consequences, including personnel injury, loss of life, or loss of vital shipboard systems. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest level of reliability and safety.
**Key Requirements and Deliverables**
- **Technical Specifications:** The nuts must conform to Naval Sea System Drawing 845-6351932, Item 75, and MIL-DTL-1222, with material requirements specified as ASTM-A194, Grade 4 or Grade 7. All internal threads must be formed by cutting (cold forming is not permitted), and thread inspection must comply with FED-STD-H28 or ASME B1 series standards.
- **Testing and Certification:** Each lot requires quantitative chemical and mechanical analysis, with certifications for liquid penetrant or magnetic particle inspection (wet method) per T9074-AS-GIB-010/271 and MIL-DTL-1222. Complete traceability must be maintained, including one additional fastener per heat/lot for traceability verification.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Government Quality Assurance (GQA) at source is required, and the contractor’s quality system is subject to government review and audit.
- **Traceability and Marking:** All fasteners must be permanently marked for traceability in accordance with MIL-DTL-1222 and MIL-STD-792, including material symbol, manufacturer’s identification, and traceability marking. Markings must remain legible after any protective coating is applied.
- **Documentation:** Contractors must submit certificates of compliance and test certifications (per CDRLs DI-MISC-80678, DI-MISC-81020, and DI-QCIC-81110) with each shipment. Certification data must be submitted via Wide Area Work Flow (WAWF) for review and acceptance by Portsmouth Naval Shipyard (DODAAC N50286) prior to shipment.
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements.
- **Delivery:** Certification data must be submitted at least 20 days prior to scheduled delivery, with final material delivery required within 365 days of contract award.
**Contract Administration and Evaluation**
- **Set-Aside and Rating:** This is a Total Small Business Set-Aside. The resulting contract will be a "DO" rated order under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense.
- **Past Performance:** NAVSUP WSS Mechanicsburg will consider past performance in the evaluation of offers, in accordance with FAR 13.106(a)(2) and DFARS 252.213-7000.
- **Amendments and Access to Drawings:** Multiple amendments have been issued to update technical data and extend the solicitation due date. Access to controlled drawings must be requested via the solicitation page on SAM.gov, with follow-up notification to the primary point of contact.
- **Emergency Acquisition Flexibilities:** This procurement is issued under Emergency Acquisition Flexibilities (EAF), streamlining certain processes due to the critical nature of the requirement.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support (WSS) Mechanicsburg, PA
- **Department/Agency:** Department of Defense, Department of the Navy
- **Primary Contact:** Christian M. Valdez, Telephone: 717-605-3229, Email: [email protected]
- **Technical POC:** Christina J. Newcomb, Telephone: 717-605-2227, Email: [email protected]
- **Submission and Notification:** Certification data and shipment notifications must be sent to [email protected]
**Special Considerations**
- **Critical Safety Item (CSI):** The nuts are classified as Critical Safety Items, requiring rigorous control of all processes, traceability, and documentation.
- **No Mercury:** Mercury and mercury-containing compounds are strictly prohibited.
- **Waivers/Deviations:** All requests for waivers or deviations must be submitted to the Contracting Officer for review and approval.
- **Subcontractor Controls:** The prime contractor is responsible for ensuring all sub-tier suppliers meet the same quality and traceability requirements.
**Constant Elements Over Contract Lifecycle**
Throughout the contract, the requirements for quality assurance, traceability, certification, and compliance with technical specifications and standards will remain unchanged. The contractor must maintain robust documentation and control systems, ensure government access for inspection and audit, and adhere to all marking, packaging, and submission protocols as outlined in the solicitation.
**Summary**
This opportunity is suited for small businesses with demonstrated expertise in manufacturing high-reliability fasteners for defense applications, robust quality management systems, and experience with government traceability and certification requirements. The solicitation is active, with responses due by February 3, 2026. Interested parties should review the full solicitation and associated technical data on SAM.gov (Opportunity ID: d3f15c0974ef4dd0814bdae35b927ec2) and ensure compliance with all submission and quality requirements.