48--TAILPIECE,VALVE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010425QZD74

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Naval Supply Systems Command (NAVSUP) Weapon Systems Support, Mechanicsburg, has issued a solicitation (N0010425QZD74) for the procurement of a Tailpiece for a 6-inch Ball Valve, classified under Product Service Code 4820 (Valves, Nonpowered) and NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing). This procurement is designated as a total small business set-aside, inviting participation exclusively from qualified small business concerns. **Purpose and Scope** The Tailpiece, as specified, is a critical component intended for use in a crucial shipboard system. The solicitation underscores the high-consequence nature of this material, designating it as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured). The failure or defect of this component could result in severe personnel injury, loss of life, or catastrophic failure of vital shipboard systems, including the potential loss of the ship itself. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the integrity and reliability of the supplied material. **Key Requirements and Deliverables** - **Technical Specifications:** The Tailpiece must conform to NAVSHIPS drawing 845-4687546, Item 2A with shim, with specific modifications as detailed in the solicitation. Notably, bolt holes on mounting flanges must not be drilled. - **Material and Testing:** The Tailpiece (Item 2A) must be manufactured from ASTM-B369, Alloy UNS C96400. Quantitative chemical and mechanical analysis is required, and certifications must be provided. Each component must undergo a hydrostatic test for strength and porosity to 1050 PSI for a minimum of three minutes, with acceptance criteria of no leakage or permanent deformation. Weldability testing and radiography are also required for each tailpiece. - **Quality Assurance:** Contractors must maintain a quality system compliant with ISO 9001, with calibration systems per ISO 10012 or ANSI-Z540.3 with ISO-17025. The contract invokes higher-level contract quality requirements, and only sources with an acceptable Quality Assurance Manual are eligible for award. - **Traceability and Certification:** Full traceability from raw material to finished product is mandatory, with unique traceability markings and comprehensive certification data. Certificates of compliance must be submitted, demonstrating conformance to all specifications and requirements, and must be traceable to each individual item. - **Welding and Brazing:** All welding and brazing must be performed by qualified personnel and procedures, with prior submission and approval of procedures and qualification data. Additional requirements apply for hardfacing and titanium materials. - **Radiography:** Radiographic inspection must be performed in accordance with T9074-AS-GIB-010/271, with acceptance criteria per S9074-AR-GIB-010A/278 or MIL-STD-2035 as applicable. All radiographed pieces must be permanently marked and traceable. - **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and the contract schedule. - **Mercury-Free Requirement:** No mercury or mercury-containing compounds may be intentionally added or come into contact with the hardware or supplies. - **Configuration Control:** The contractor is responsible for maintaining the total equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - **Government Source Inspection:** The contract provides for government quality assurance at the source, and the place of performance may not be changed without authorization. - **Data Submission:** Certification documentation must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, via the Wide Area Work Flow (WAWF) system. No material is to be shipped prior to receipt of acceptance. **Contracting Entity and Contact Information** - **Contracting Agency:** NAVSUP Weapon Systems Support, Mechanicsburg (NAVSUP-WSS MECH) - **Location:** Mechanicsburg, PA - **Primary Contact:** Kathryn E. Shutt, Telephone: 717-605-2430, Email: [email protected] **Procurement Type and Special Considerations** This is a fixed-price solicitation issued under emergency acquisition flexibilities, with a "DO" rated order certified for national defense use under the Defense Priorities and Allocations System (DPAS). The resultant award will be bilateral, requiring the contractor’s written acceptance prior to execution. The procurement is set aside for small businesses, and only those with an acceptable Quality Assurance Manual are eligible. The use of AbilityOne support contractors is noted, and the release of offeror information is subject to Navy policy. **Applicable Standards and Documentation** The solicitation references a comprehensive set of military, federal, and commercial specifications and standards, including but not limited to ANSI/ASQ Z1.4, ASTM-B369, MIL-STD-792, MIL-STD-2035, ISO 9001, ISO 10012, ISO/IEC 17025, MIL-I-45208, MIL-STD-45662, and various NAVSEA welding and inspection standards. Contractors are responsible for obtaining and adhering to all referenced documents and revisions as specified. **Constant Elements Over Contract Lifecycle** Throughout the contract lifecycle, the following elements remain constant: - The critical safety and quality assurance emphasis on the supplied material. - The requirement for full traceability, certification, and compliance with all technical and quality standards. - The necessity for government review and acceptance of certification data prior to shipment. - The maintenance of configuration control and the submission of ECPs for any changes. - The requirement for a robust, documented quality system and government source inspection. **Summary for Contractors** This opportunity is suited for small businesses with demonstrated expertise in manufacturing high-reliability, precision metal valve components for naval applications, and with robust quality assurance systems in place. Contractors must be prepared to meet rigorous technical, testing, traceability, and documentation requirements, and to interface with government quality assurance and acceptance processes. The procurement supports national defense priorities and is subject to emergency acquisition flexibilities, making timely and compliant performance essential. Interested parties should review the full solicitation and associated technical documentation, and direct any questions to the contracting officer listed above. The response deadline is December 16, 2025. For further details and to access the solicitation, visit: [SAM.gov Opportunity N0010425QZD74](https://sam.gov/opp/52bcf37c45034cbabd566e1a76136ed9/view).