CUTTER HAWSEPIPE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010425QFC47
NAICS
334290 - Other Communications Equipment Manufacturing
Classification Code
5845
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation for the procurement of a Cutter Hawspipe Assembly, a critical component intended for use in vital shipboard systems. This procurement is classified under NAICS Code 334290 (Other Communications Equipment Manufacturing) and Product Service Code 5845, and is designated as a total small business set-aside, inviting qualified small business contractors to participate.
Purpose and Scope:
The Cutter Hawspipe Assembly is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) due to its application in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the ship. The contract invokes stringent control procedures to ensure the delivery of correct, defect-free material, reflecting the assembly’s importance to national defense and operational readiness.
Key Requirements and Objectives:
Contractors must manufacture the Hawspipe Cutter Assembly in strict accordance with NAVSEA Drawing 596-7409396, Assembly A1, and all associated engineering reports and specifications, except as modified by the solicitation. The assembly and its components are subject to extensive material, testing, and certification requirements, including:
- Material certifications for chemical and mechanical properties, traceable to unique markings.
- Testing certifications for visual, dye penetrant, magnetic particle, hydrostatic, and operational tests, as well as wedge tensile and ultrasonic inspections.
- Compliance with multiple referenced standards and specifications, including MIL-C-24723, QQ-N-281, QQ-N-286, MIL-DTL-1222, ASTM standards, and ISO quality system requirements.
- Special requirements for welding and brazing, including submission and approval of welding procedures and qualification data, and prohibition of repair welding on certain materials.
- Configuration control, traceability, and documentation, including certificates of compliance, engineering change proposals, and retention of quality system procedures.
- Mercury-free requirements and prohibition of molybdenum disulfide thread lubricants.
- Marking and identification requirements, including the addition of a Component Identification Description (CID) number and traceability markings.
Expected Deliverables:
The contractor is expected to deliver fully compliant Cutter Hawspipe Assemblies, accompanied by all required certifications, test reports, and documentation. The final delivery of material must occur within 365 days after the effective date of the contract. Submission of Certification Data CDRLs is required 20 days prior to scheduled delivery, with review and acceptance by Portsmouth Naval Shipyard (PNSY) within 6 working days. The contract also specifies a one-year warranty from the date of delivery.
Contracting Entity and Contact Information:
The solicitation is managed by NAVSUP Weapon Systems Support Mechanicsburg, a federal office under the Department of Defense and Department of the Navy. The primary point of contact is Scott R. Youngblood, reachable at 717-605-2379 or [email protected]. Additional contact information includes Markus A. Hamilton (717-605-2147, [email protected]).
Procurement Type and Special Considerations:
This is a fixed-price solicitation, issued under Emergency Acquisition Flexibilities (EAF), and is a "DX" rated order under the Defense Priorities and Allocations System (DPAS), signifying its priority for national defense. Access to classified drawings is required for contract performance, and facility clearance may be necessary in accordance with FAR 52.204-2. Past performance will be considered in the evaluation of offers.
Quality Assurance and Lifecycle Elements:
Contractors must maintain a quality system in accordance with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Government quality assurance at source is required, and the place of performance may not be changed without authorization. All inspection, testing, traceability, and certification requirements must be maintained throughout the contract lifecycle, ensuring the integrity and reliability of the delivered assemblies.
Response and Timeline:
The solicitation is active, with a response deadline of September 7, 2026. Drawings are available upon request via the solicitation page on SAM.gov, and access must be coordinated with the primary point of contact.
Contractors considering this opportunity should carefully review the detailed requirements, quality assurance provisions, and documentation obligations to ensure alignment with their capabilities and compliance infrastructure. The procurement represents a significant opportunity to support the Navy’s operational readiness with high-assurance, mission-critical shipboard components.
For further details and to access the solicitation, visit: https://sam.gov/opp/eca6e611b68444f583a1609a8de5b104/view