31--BUSHING,SLEEVE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010425QZB76
NAICS
332991 - Ball and Roller Bearing Manufacturing
Classification Code
3120
Additional Details
Documents1
The Naval Supply Systems Command (NAVSUP) Weapon Systems Support, Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010425QZB76) for the supply of a specialized component: the "Bushing, Sleeve." This procurement is classified under NAICS Code 332991 (Ball and Roller Bearing Manufacturing) and Product Service Code 3120, indicating its relevance to precision mechanical parts for shipboard systems. The solicitation is currently active, with responses due by November 5, 2025.
**Purpose and Scope**
The primary objective of this procurement is to acquire backup stem sleeves that are integral to a critical shipboard system. The nature of this requirement is such that any incorrect or defective material could result in catastrophic failure, including serious personnel injury, loss of life, or loss of vital shipboard systems. As a result, the material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), invoking stringent control procedures to ensure the delivery of correct and compliant material.
**Key Requirements and Deliverables**
- **Technical Specifications:** The backup stem sleeve must conform to NAVSEA Drawing 803-5959302, Item 12, and General Notes Drawing 803-5959311, with material specified as E.B.Spec 3644 (modified by Supplementary Notes S4.F and S4.J).
- **Testing and Certification:** Quantitative chemical and mechanical analysis is required. Certifications must be provided for non-destructive tests, including weld repair/production welds and dye penetrant inspection per T9074-AS-GIB-010/271 and MIL-STD-2035. Radiography is required in accordance with drawing specifications.
- **Welding and Brazing:** All welding, brazing, and allied processes must comply with NAVSEA standards (S9074-AR-GIB-010A/278, 0900-LP-001-7000, S9074-AQ-GIB-010/248). Procedures and qualification data must be submitted for approval prior to any welding or brazing activities.
- **Quality Assurance:** Contractors must maintain a quality system in accordance with ISO-9001, ISO-10012, ANSI-Z540.3, and ISO-17025, or MIL-I-45208 with MIL-STD-45662 calibration requirements. The system and products are subject to government evaluation, verification, and inspection.
- **Traceability and Certification:** Full traceability from material to certification test reports is mandatory. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, via Wide Area Work Flow (WAWF).
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements.
- **Compliance:** Mercury and mercury-containing compounds are strictly prohibited. All supplied items must be free from mercury contamination.
- **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- **Inspection and Acceptance:** Government Quality Assurance at source is required. Final inspection includes material sampling, verification of traceability, and review of all certification and test reports.
**Contracting Entity and Contact Information**
- **Entity:** NAVSUP Weapon Systems Support, Mechanicsburg (Federal Office)
- **Primary Contact:** Robert H. Langel, Telephone: 717-605-3353, Email: [email protected]
- **Location:** Mechanicsburg, PA
- **Submission and Review:** Certification documentation must be submitted via WAWF, with notifications to [email protected]. No material may be shipped prior to receipt of acceptance.
**Procurement Type and Special Considerations**
- **Solicitation Type:** This is a formal solicitation for supplies, with the resultant award to be issued bilaterally, requiring written contractor acceptance.
- **Set-Aside:** The procurement is a total small business set-aside, as indicated by the relevant FAR clause.
- **Emergency Acquisition Flexibilities (EAF):** The requirement is being processed under EAF, reflecting its urgency and criticality.
- **Security and Access:** Access to NOFORN and/or Naval Nuclear Propulsion Information is required. Contractors must complete a security agreement form via SAM.gov to obtain necessary drawings.
- **DPAS Rating:** The contract will be DO certified for national defense under the Defense Priorities and Allocations System (DPAS).
- **Past Performance:** NAVSUP WSS will consider past performance in the evaluation of offers.
**Constant Elements Throughout the Contract Lifecycle**
- The requirement for strict adherence to technical specifications, quality assurance protocols, and traceability will remain unchanged.
- All certification, inspection, and acceptance procedures will be consistently enforced.
- The prohibition of mercury and the need for configuration control and compliance with NAVSEA standards are enduring requirements.
- The contract will maintain its status as a critical safety item (CSI), with all associated controls and documentation.
- Government source inspection and acceptance at Portsmouth Naval Shipyard will be required for each shipment.
**Summary for Contractors**
This opportunity is suited for small businesses with proven capabilities in precision manufacturing, quality assurance, and compliance with rigorous military and NAVSEA standards. Contractors must demonstrate robust quality systems, experience with critical safety items, and the ability to manage complex certification and traceability requirements. The procurement supports national defense priorities and demands a high level of technical and procedural discipline throughout the contract lifecycle.
Interested parties should review the full solicitation and associated drawings (available via SAM.gov with appropriate security clearance), and direct any questions or requests for access to the primary contact listed above. The solicitation has been extended to allow for drawing access and competitive participation.
For further details and to access the solicitation, visit: [SAM.gov Opportunity](https://sam.gov/opp/1f4a536193eb4a53b215b519944378d4/view).