53--NUT,PLAIN,HEXAGON

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010425QND48

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5310

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Naval Supply Systems Command (NAVSUP) Weapon Systems Support, Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010425QND48) for the supply of plain hexagon nuts, classified under Product Service Code 5310 (Nuts and Washers) and NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing). This procurement is a Total Small Business Set-Aside, inviting qualified small business manufacturers to participate. **Purpose and Scope** The primary objective of this procurement is to acquire specialized hexagon nuts for use in critical shipboard systems. These components are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting their essential role in ensuring the safety and operational integrity of naval vessels. The failure or nonconformance of these items could result in severe consequences, including personnel injury, loss of life, or catastrophic system failure. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements. **Key Requirements and Deliverables** - **Technical Specifications:** The nuts must be manufactured in accordance with Buships drawing 803-4385050, find 69, and DRN 4385050-C2, with specific modifications and exceptions detailed in the solicitation. Material must be QQ-N-286, form 2, annealed and age hardened, with mechanical properties per Supplementary Note S4.B. No weld repair is permitted on QQ-N-286 material. - **Testing and Certification:** Quantitative chemical and mechanical analysis is required, with certifications for ultrasonic and dye penetrant inspections. The slow strain rate tensile test must be performed by one of several specified laboratories. All internal threads must be cut (not cold formed), and all threads must be inspected per FED-STD-H28 or ASME B1 series. - **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208), with calibration systems per ISO-10012, ANSI-Z540.3, and ISO-17025. Government Quality Assurance at source is mandatory, and the contractor’s quality system is subject to review and audit. - **Traceability:** Full traceability from raw material to finished product is required, with unique traceability markings on each item, linked to certification test reports. Markings must be permanent and conform to MIL-STD-792, with alternate methods allowed only as specified. - **Documentation:** Certificates of compliance and test certifications must be submitted via Wide Area Work Flow (WAWF) and accepted by Portsmouth Naval Shipyard prior to shipment. No material may be shipped before acceptance. - **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements. - **Configuration Control:** Any waivers, deviations, or engineering changes require prior government approval and must be documented and justified according to contract procedures. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), a federal office responsible for the procurement. - **Location:** Mechanicsburg, PA. - **Primary Contact:** Jordan D. Neely, Telephone: 717-605-8197, Email: [email protected]. - **Technical POC:** Ryan Powell, Email: [email protected]. **Procurement Type and Special Considerations** This is a fixed-price solicitation, set aside exclusively for small businesses. The procurement is subject to Emergency Acquisition Flexibilities (EAF) and is a DO-rated order under the Defense Priorities and Allocations System (DPAS), indicating its priority for national defense and emergency preparedness. The award will be bilateral, requiring written contractor acceptance. Past performance will be considered in accordance with FAR 13.106(a)(2). **Additional Considerations** - **Compliance:** The Buy American and Free Trade Agreements clauses apply. - **Inspection and Acceptance:** Inspection and acceptance will occur at the destination, with government oversight at the contractor’s facility and/or subcontractor locations as required. - **Delivery:** The desired and required delivery schedule is specified in the solicitation (e.g., 250 units within 365 days for CLIN 0001AA). - **Data and Drawings:** Access to technical drawings may require request and approval via SAM.gov and coordination with the listed POC. - **No Mercury:** Mercury or mercury-containing compounds are strictly prohibited in the supplied materials. **Constant Elements Over Contract Lifecycle** Throughout the contract, the following elements will remain constant: the requirement for rigorous quality assurance and traceability, the need for government acceptance prior to shipment, the prohibition of mercury, and the necessity for configuration control and documentation of any changes. The contract’s classification as a Level I/SUBSAFE item underscores the enduring emphasis on safety, reliability, and compliance with all technical and regulatory requirements. **Summary** This solicitation represents a critical supply opportunity for small business manufacturers with expertise in high-assurance, traceable, and certified fastener production for naval applications. Contractors must demonstrate robust quality systems, experience with Level I/SUBSAFE materials, and the ability to comply with detailed technical, testing, and documentation requirements. Interested parties should review the full solicitation and associated drawings and specifications, and direct any technical or administrative questions to the listed contacts. For more information and to access the solicitation, visit: [SAM.gov Opportunity N0010425QND48](https://sam.gov/opp/2b7ee8f5dca8463b972de27394595644/view).