SCREW, SELF LOCKING

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010425QFC10

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5305

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents1
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support in Mechanicsburg, PA, has issued a solicitation (N0010425QFC10) for the procurement of self-locking screws, classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5305. This procurement is a total small business set-aside, inviting qualified small business manufacturers to submit offers for the supply of these critical fasteners. **Purpose and Scope** The self-locking screws to be procured are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) for use in crucial shipboard systems. The criticality of these components is underscored by their application in systems where failure could result in serious personnel injury, loss of life, or catastrophic damage to naval vessels. As such, the procurement is governed by stringent quality assurance, traceability, and certification requirements to ensure the highest standards of safety and reliability. **Key Requirements and Deliverables** - **Technical Specifications:** The screws must conform to MIL-DTL-1222, with specific requirements for material (ASTM-A574, hardened and tempered), size (3/8 inch diameter, 1 1/8 inches length), thread series (16 UNRC, Class 3A), and a self-locking element in accordance with MIL-DTL-18240. Additional mechanical properties include a minimum tensile strength of 170,000 psi, yield strength of 150,000 psi, elongation of 12% (min), and hardness between 36-43 R.C. - **Testing and Certification:** Contractors must provide certifications for chemical, mechanical, and non-destructive testing, including liquid penetrant or magnetic particle inspection, wedge tensile tests, and hydrogen embrittlement relief (where applicable). All test results must be traceable to the specific heat/lot of material and submitted with each shipment. - **Traceability and Marking:** Complete traceability from raw material to finished product is mandatory. Each fastener must be permanently marked in accordance with MIL-STD-792 and MIL-DTL-1222, including material grade, manufacturer identification, and unique traceability codes. - **Quality Assurance:** Contractors are required to maintain a quality system compliant with ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO 10012, ANSI-Z540.3, or ISO 17025. Government source inspection at the contractor’s facility is required, and any changes to the quality system must be approved by the Government. - **Documentation and Data Submission:** Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before receipt of acceptance. - **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and any additional contract requirements. - **Warranty:** A one-year warranty from the date of delivery is required for all supplied items. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support, Mechanicsburg, PA (Federal Office, Organization Key: 500021097) - **Department/Agency:** Department of Defense, Department of the Navy - **Primary Contact:** Lydia M. Shaloka, Telephone: 215-697-4717, Email: [email protected] - **Additional POC:** Christina J. Newcomb, Telephone: 717-605-2227, Email: [email protected] **Procurement Type and Special Considerations** - **Solicitation Type:** This is a formal solicitation for a fixed-price supply contract. - **Set-Aside:** The opportunity is a total small business set-aside, restricting competition to qualified small business concerns. - **Priority Rating:** The resulting contract will be a "DX" rated order under the Defense Priorities and Allocations System (DPAS), indicating the highest national defense urgency. - **Emergency Acquisition Flexibilities:** The order is issued under Emergency Acquisition Flexibilities (EAF), which may affect certain procurement timelines and procedures. - **Evaluation Criteria:** Past performance will be considered in the evaluation of offers, in accordance with FAR 13.106(a)(2) and DFARS 252.213-7000. **Contract Lifecycle Considerations** Throughout the contract lifecycle, the following elements will remain constant: - The requirement for strict adherence to technical specifications and quality assurance protocols. - The necessity for comprehensive traceability and documentation for all materials and processes. - The obligation to submit all required certifications and data for government review and acceptance prior to shipment. - The expectation of compliance with all marking, packaging, and warranty provisions. - The need for ongoing communication with the contracting office and adherence to government inspection and acceptance procedures. **Summary for Contractors** This procurement represents a highly specialized and critical supply requirement for the U.S. Navy, demanding rigorous quality control, traceability, and compliance with military standards. Contractors with proven experience in manufacturing high-strength, self-locking fasteners for defense applications, and with robust quality management systems, are well-positioned to respond. The opportunity is ideal for small businesses capable of meeting the technical, documentation, and certification demands of Level I/SUBSAFE material for naval shipboard systems. Interested parties should review the full solicitation and associated attachments via the official SAM.gov notice (Opportunity ID: dc197f16745341b4a5deffef621de133) and ensure all questions and submissions are directed to the designated contracting officials. For further details and to access the solicitation, visit: https://sam.gov/opp/dc197f16745341b4a5deffef621de133/view