VENT-DRAIN ASSEMBLY
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010425QFF43
NAICS
332913 - Plumbing Fixture Fitting and Trim Manufacturing
Classification Code
4510
Additional Details
The Naval Supply Systems Command (NAVSUP) Weapon Systems Support, Mechanicsburg, has issued a solicitation (N0010425QFF43) for the procurement of a Vent-Drain Assembly, classified under NAICS code 332913 (Plumbing Fixture Fitting and Trim Manufacturing) and Product Service Code 4510. This procurement is a Total Small Business Set-Aside, inviting qualified small business contractors to submit offers for the manufacture and delivery of this critical shipboard component.
**Purpose and Scope**
The Vent-Drain Assembly to be procured is a crucial component intended for use in vital shipboard systems. The assembly is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting its criticality: the use of incorrect or defective material could result in catastrophic failure, including serious personnel injury, loss of life, or loss of essential shipboard systems. As such, the procurement invokes stringent control and quality assurance procedures to ensure the correct material is received and installed.
**Key Requirements and Deliverables**
- **Technical Specifications:** The assembly is a 2-inch IPS, 1500 PSI vent and drain assembly, to be manufactured in strict accordance with Electric Boat Drawing 2621-827-05 (sheet 14, assembly 14A) and liability STD-A1266, with specific modifications and amplifications detailed in the solicitation.
- **Material and Certification:** Key parts require quantitative chemical and mechanical analysis, with traceability and certification to ASTM-B584 (UNS C90300) and QQ-N-281 (with mechanical properties per General Note 22). All materials must be mercury-free.
- **Testing:** Each assembly must undergo and be certified for non-destructive testing, hydrostatic testing (2250 PSI for 5 minutes, no leakage or deformation), and seat leakage testing (2025 PSI for 3 minutes, no leakage). Pressure and time tolerances are strictly defined.
- **Manufacturing Processes:** All internal threads must be cut (not cold-formed), and thread lubricants containing molybdenum disulfide are prohibited. Anti-galling compound A-A-59004 is required for assembly.
- **Welding and Brazing:** All welding and brazing must comply with NAVSEA and Electric Boat standards, with procedures and qualification data submitted for approval prior to production. Approval letters for previously qualified procedures may be submitted, but must reference the applicable procedure and contract.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012, ANSI-Z540.3, and ISO-17025. Government Quality Assurance at source is required, and the contractor’s quality system is subject to audit and approval.
- **Traceability:** Full traceability from raw material to finished product is mandatory, with permanent marking and documentation requirements. Certification data must be submitted and accepted prior to shipment.
- **Documentation:** Deliverables include certificates of compliance, test certifications, and configuration control documentation. All documentation must be submitted electronically via Wide Area Work Flow (WAWF) and accepted by Portsmouth Naval Shipyard (DODAAC N50286) before shipment.
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support, Mechanicsburg
- **Primary Contact:** Lydia M. Shaloka, 215-697-4717, [email protected]
- **Location:** Portsmouth Naval Shipyard (DODAAC N50286)
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/7b0eb661b5f94901b788c4272662c292/view)
**Procurement Type and Special Considerations**
- **Set-Aside:** This solicitation is a Total Small Business Set-Aside.
- **Contract Type:** Fixed-price, with inspection and acceptance at destination.
- **DPAS Rating:** Any resulting contract will be a “DX” rated order under the Defense Priorities and Allocations System (DPAS), indicating national defense urgency.
- **Emergency Acquisition Flexibilities:** The order is issued under Emergency Acquisition Flexibilities (EAF).
- **Evaluation Criteria:** Past performance will be considered in accordance with FAR 13.106(a)(2) and DFARS 252.213-7000.
- **Access to Drawings:** If drawings are included, access must be requested via the solicitation page on SAM.gov, with follow-up email to the primary POC.
**Schedule and Deliverables**
- **Certification Data:** Submission required at least 20 days prior to scheduled delivery.
- **Brazing Procedures and Qualification Data:** Submission required within 120 days after contract award; approval within 60 days of receipt.
- **Final Delivery:** All materials must be delivered within 365 days of contract effective date.
- **No Shipment Prior to Acceptance:** No material may be shipped until certification data is reviewed and accepted by Portsmouth Naval Shipyard.
**Constant Elements Over Contract Lifecycle**
- The requirement for strict adherence to technical specifications, quality assurance, and traceability will remain constant throughout the contract.
- The need for configuration control, documentation, and compliance with all invoked standards and procedures is ongoing.
- The contract’s critical safety designation and associated controls will persist for the duration of the contract.
**Summary for Contractors**
This opportunity is suited for small businesses with demonstrated expertise in manufacturing high-pressure, high-integrity shipboard components, and with robust quality assurance, traceability, and documentation systems. Contractors must be prepared to meet rigorous technical, testing, and certification requirements, and to interface with government quality assurance and acceptance processes. The contract’s “DX” rating and emergency acquisition status underscore the urgency and importance of timely, compliant delivery.
Interested parties should review the full solicitation and associated technical documents, and direct any questions or requests for drawing access to the primary contact listed above.